Mellanox MSX6015T rev.Ax Switch Firmware 9.4.1000 Download

Posted at December 22, 2024 by PCI-DB Team

Mellanox MSX6015T rev.Ax Switch Firmware 9.4.1000 Description

Changes:

- Added system MKey support

Bug Fixes:

- UID LED MAD is not responsive.
- PSU fans set to work with 60% max speed by default
- The command “show interfaces ib transceiver” shows no cable is connected while link is up.

Known Issues:

- The SampleCounter mechanism is not supported.
- Resetting the counters of port receive packets and port receive unicast packets using “Performance class MAD” or the VL15 received packets and data counters using Mellanox Vendor Specific MAD resets all of the above counters.
- FDR link may raise as FDR10 when plugged in near an FDR10 cable.
- Link width negotiation is not supported.
- Link up negotiation may take up to 70 seconds.
- DDR link may rise with errors or at SDR speed when connecting to ConnectX®-3 version
- 2.30.3000 or earlier, Connect-IB™ version 10.10.1000 or earlier, or previous releases of SwitchX®.
- QDR capabilities at the INI must be enabled when working in FDR mode.
- Downgrading to firmware version 9.2.0000 requires power cycling the switch for the firmware to load.
- Loopback modules are not supported and do not link up.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Mellanox Drivers