ECS A785GM-AD3 (V1.0) ATI VGA Driver 8.631 for Vista/Win7 Download
Posted at April 29, 2024 by PCI-DB Team
Install Driver Automatically| Device Name | ECS A785GM-AD3 (V1.0) ATI VGA Driver 8.631 for Vista/Win7 |
|---|
| Category | Graphics Board |
|---|
| Manufacturer | ATI |
|---|
| File Size | 106 MB |
|---|
| Supported OS | Windows Vista ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit |
|---|
ECS A785GM-AD3 (V1.0) ATI VGA Driver 8.631 for Vista/Win7 Description
CPU
- Socket AM3 socket for AMD Phenom II processors
- Support 95W Phenom II X6 processors
- High-performance HyperTransport 3.0 CPU Interface
- Support transfer rate up to 5200 mega-transfers per second
- Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.
CHIPSET
- AMD 785G & AMD SB710
- North Bridge: AMD 785G
- South Bridge: AMD SB710
GRAPHICS
- Integrated DirectX10.1 graphics processor
- Share Memory: Maximum up to 512MB
MEMORY
- Dual-channel DDR3 memory architecture
- 4 x 240-pin DDR3 DIMM socket support up to 32GB per one DIMM support 8GB
- Support DDR3 OC1600/1333/1066/800 DDR3 SDRAM
- *(Due to the DRAM maximum size is 2GB at present, the memory maximum size we have tested is 4GB)
- *(Due to AMD CPU spec limitation, please refer to Memory QVL for more information)
EXPANSION SLOT
- 1 x PCI Express x16 slot
- 2 x PCI Express x1 slots
- 3 x PCI slots
STORAGE
- Support by AMD SB710
- 2 x Ultra DMA133/100/66 devices
- 5 x Serial ATA 3.0Gb/s devices
- 1 x eSATA
- RAID0, RAID1, RAID10 configuration
AUDIO
- Realtek ALC 888S supports 8-channel HD audio
- Realtek ALC662 6-channel HD Audio codec(optional)
- Compliant with HD audio specification
LAN
- RealTek 8111DL Gigabit Fast Ethernet
REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x D-sub(VGA)
- 1 x DVI connector
- 1 x RJ45 LAN connector
- 1 x Audio port (1x Line in, 4x Line out, 1x Optical SPDIF Out)
- 1 x External SATA port
- 6 x USB ports
INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4pin CPU_FAN connectors
- 1 x 3-pin NB_FAN connector
- 1 x 3-pin SYS_FAN connector
- 1 x Power on button
- 1 x Reset button
- 1 x IDE connector
- 1 x Speaker header
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x Clear CMOS button
- 1x CD in header
- 5 x Serial ATA connectors
- 3 x USB 2.0 headers support additional 6 USB ports
- 1 x 4-pin 12V Connector
- 1 x Chassis intrusion header
- 1X Power on LED (Green light)
- 1X Stand by LED (Red Light)
SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Supports ACPI & DMI
- Supports CPU FSB adjustment, increase of 1MHz
- Supports PCI interrupt selection
- Audio, LAN, can be disabled in BIOS
- F11 hot key for boot up devices option
- Support over-clocking
- Support Page Up clear CMOS Hotkey
- Support ECS M.I.B II Utility
- CPU voltage adjustable
- Memory voltage adjustable
- NB Chipset Voltage Adjustable
- SB Chipset Voltage Adjustable
- External Clock Adjustable
- Multiple Frequency Adjustable
FORM FACTOR
- ATX Size, 305mm*220mm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related ATI Drivers