KT&C EZHD-TVL8 Recorder Firmware 3.1.2 Download

Posted at November 2, 2024 by PCI-DB Team

KT&C EZHD-TVL8 Recorder Firmware 3.1.2 Description

Fixes:

- Adds VCA Line Crossing & Area Intrusion (One camera on TVL & TVF models, 2 Cameras on TRF models);
- Adds ONVIF support for attached IPC. For TRF and TVF-32 Only: Allows swap of coax cameras for IPC - disable one or several BNC cameras and use IPC in place of BNC. On TRF can have up to 100% IPC;
- on TVF-32, 8 IPC + 8 BNC + 24 cameras can be either BNC or IPC (so range of combinations is from 8+32 to 32+8).

NOTE:

- For Use with EZHD-TVI Recorders: TVL, TRF Series and TVF-32

About DVR Firmware:

Applying a new firmware package on your Digital Video Recorder (DVR) should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The NVR should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn’t pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit’s setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Network Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don’t forget to regularly check with our website so that you don’t miss any updates. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related KT&C Drivers