Panasonic AK-UC3000 Camera Firmware 3.02 Download

Posted at December 22, 2024 by PCI-DB Team

Panasonic AK-UC3000 Camera Firmware 3.02 Description

Changes:

- CAC Function for 4K
- Support for FBC (Flash Band Compensation)
- Support for LAN TRUNK. Data transfer between the camera and CCU at 1Gbps
- Support for Camera Menu operation via ROP. Camera menu displayed on CCU’s Preview Monitor and operated via ROP
- Digital Zoom Extender Function

Additional Formats: CCU output formats as shown below:

- AK-UC3000 with AK-UCU500
- UHD 3840x2160 29.97p /25p / 23.98p
- HD 1080 29.97Psf / 25Psf / 23.98Psf / 23.98p over 59.94i

Version display method:

- Connect the View Finder AK-HVF100.
- In case of no AK-HVF100, connect HD SDI 2 output to the monitor for displaying the Camera menu.
- Press MENU button. Select the item of menu with Jog Dial button.
- Each software version can be confirmed at item “VERSION” in DIAGNOSTIC menu.
- MAIN MENU (2/2) > DIAGNOSTIC > VERSION

Update procedure:

- Connect the View Finder AK-HVF100.
- In case of no AK-HVF100, connect HD SDI 2 output to the monitor for displaying the Camera menu.
- Insert the SD memory card into the SD memory card slot.
- Press the MENU button, and turn the SELECT dial button to display “MAINTENANCE”.
- Select “MAINTENANCE” and press the SELECT dial button to open the MAINTENANCE menu screen.
- Select item “UPDATE” and press the SELECT dial button. The update confirmation screen opens.
- Select “YES”, and pressing the SELECT dial button, update program is started and following message is displayed
- Software update takes approx. 40min. Do not power down while updating.
- When the update is completed, the message the camera will re-boot automatically.

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Panasonic Drivers