Panasonic AK-HRP1000 Remote Operation Panel Firmware 3.00 Download

Posted at December 22, 2024 by PCI-DB Team

Panasonic AK-HRP1000 Remote Operation Panel Firmware 3.00 Description

Support for connection with AK-HC3500A / AK-HC3800

- Combination and compatibility with Control Unit as shown below
- AK-HC3500A with AK-HCU355A (Serial interface connection only)
- AK-HC3800 with AK-HCU200 (Serial and IP interface connections)
- AK-HC3800 with AK-HCU200A MC/MS (Serial and IP interface connections)
- AK-HC1000 with AK-HCU100 MC/MS (Serial and IP interface connections)

Menu item for the priority of IRIS control by ROP is added

- MENU: ROP SETTING ->IRIS PRIORITY (Serial interface connection only)

Version display method:

- Supply the power to AK-HRP1005 by connecting to AK-HC5000/UC3000, AK-UCU500, or PoE HUB.
- Press the SETUP button. The TOP menu screen of ROP menu appears.
- Select “ROP SETTING” by pressing the Function Up/Down button.
- Press the EXEC button to open the ROP SETTING menu.
- When pressing the Function Up/Down button, SYSTEM version and each Software version can be confirmed.

Update procedure:

- Insert the SD memory card into the SD memory card slot.
- Supply the power to AK-HRP1005 by connecting to AK-HC5000/UC3000, AK-UCU500, or PoE HUB.
- Press the SETUP button. The TOP menu screen of ROP menu appears.
- Select “ROP SETTING” by pressing the Function Up/Down button.
- Press the EXEC button to open the ROP SETTING menu.
- Select “UPGRADE” by pressing the Function Up/Down button.
- Select “YES” by turning the MENU dial A, and press the MENU dial A. Confirm dialog appears.
- When pressing the MENU dial C, the update will start.
- NOTE: Pressing the MENU dial B while “No (EXIT)” is selected, the update will be cancel. Software update takes approx. 3min. Do not power down while updating.
- When the update is completed, the message “COMPLETE” is displayed.
- When pressing the MENU dial C, ROP will reboot automatically.

About Camera Adapter Updates:

Updating to a different firmware version than the one already installed on the adapter can bring various changes such as improved performance and stability, add new features or enhance existing ones, but also various fixes for more or less recurrent issues.

Given the large variety of camera adapters and numerous methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you consider applying the new firmware, even if you are a power user.

If you try to perform the update without knowing all the steps, you risk ending up with a broken device. However, what every upgrade needs is a compatible firmware to be transferred to the adapter (or to the camera) via either a USB cable or a suitable memory card.

That being said, if you consider applying this release and have made sure you’re properly informed on the process of performing the upgrade successfully, hit the download button, and update your camera adapter.

Check with our website as often as possible in order to be up to date with the latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Panasonic Drivers