Aopen MX3W Bios 1.10 Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Aopen MX3W Bios 1.10
Category	Bios
Manufacturer	Aopen
File Size	227 KB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Aopen MX3W Bios 1.10 Description

# Checksum 5151h
# Applies to both MX3W and MX3W-L
# Password no longer required in booting procedure if "Setup" chosen in the security option.
# Fixes occassional SCSI boot failure when first bootable device is not set to be SCSI (e.g. C,A,SCSI but C: is not formatted)
# Adds "Assign IRQ For VGA" option and "Assign IRQ For USB" function.
# -5V no longer displayed in System Health if Micro ATX PSU is used.
# [Note] The AOpen Easy Flash way does not apply to this new 4Mb BIOS. Please follow steps below to flash the MX3W BIOS.
# Procedure: Download this self-extracting file and execute it to get the binary BIOS file, flash and checksum utilities. Run "CHECKSUM MX3Wxxx.BIN" to see if the checksum of the downloaded file is exactly the same as indicated. If not, do the downloading again. Save "AOFL170.EXE" and "MX3Wxxx.BIN" to a DOS floppy disk. Reboot your system with this disk without loading any memory handler (suh as EMM386) or device driver to get as much free space as possible. Execute A:>AOFL170 MX3Wxxx.BIN. DO NOT turn off the power during flashing process, until you are asked to!! Reboot system and press "DEL" to enter BIOS setup, load "BIOS SETUP DEFAULT", then SAVE and EXIT. Done!


Specifications:


Model MX3W
CPU: Socket 370
Support Intel Pentium III, Celeron, VIA C3 CPU
FSB 100MHz
Chipset: Intel 810 DC-100
Intel ICH
Main Memory : 8/16/32/64/128/256MB
SDRAM DIMM
PC100 SDRAM
Max Memory : 512MB
Super I/O: Winbond
Clock Gen.: Cypress
Graphics: Integrated VGA Engine in chipset
IDE: Integrated ATA66 Controller
Max Disk : 137GB [28 bits ATA Spec.]
Audio: Analog Devices AC'97 Audio CODEC on-board
USB: USB 1.1 Port x 1
Slot: PCI
AMR
Storage & Back Panel I/O: IDE Channel : ATA66
Floppy Drive Connector : Floppy Drive Connector x 1
PS/2 Keyboard : x 1
PS/2 Mouse : x 1
VGA Port : x 1
Printer Port : Printer Port x 1
COM Port : COM Port x 1
USB Port : USB Port x 1
Game/MIDI Port : x 1
Line_In : x 1
Speaker_Out : x 1
MIC_In : x 1
On Board Connector: CPU FAN
Chassis FAN
System FAN
Front Audio
Front Panel Connector : Front Panel
CD_IN Connector : CD_IN
IrDA Connector : IrDA
AUX_IN Connector : AUX_IN
COM2 Connector : COM2 Port x 1
Wake_on_LAN
Wake_on_Modem
MODEM_CN
BIOS: Award PnP 4Mb Flash ROM BIOS
Form Factor: Micro ATX
Board Size: 244 mm x 220 mm
Software & Utility: HWMON utility
Acrobat Reader
AOconfig utility
Online eBook Manual
Accessory: Bonus Pack CD disc
Floppy Disk cable
40-wire IDE cable

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Aopen Drivers