Posted at December 22, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | Buffalo LS410D NAS Firmware 1.80 |
---|---|
Category | Hdd Ssd Nas Usb Flash |
Manufacturer | Buffalo |
File Size | 195 MB |
Supported OS | Windows XP ,Windows Vista ,Windows 2008 ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows Server 2012 ,Windows |
- Settings is now supported for mobile devices.
- Modified so that the RAID array is rebuilt after a complete drive format.
- Fixed a bug where the email notification did not work properly during RAID scanning.
- Fixed a bug where NAS did not respond during a disk check if the unit contained too many files.
- Fixed a bug where changing recycle bin settings took a long time.
- Fixed a bug where some help text on Settings were not displayed correctly.
- Fixed a bug where the DLNA server did not start on LS421DE and LS441DE models.
- Please consult technical support or your local representative if the firmware update causes unexpected problems.
- Do not turn the unit off until the update is finished. The update takes several minutes.
- Connect the LinkStation properly and configure the LinkStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
- Close all applications. Also, stop or exit any firewall software.
- Extract the downloaded file and run "LSUpdater.exe". When a LinkStation is detected, an update window will open.
- Select the LinkStation to update if multiple LinkStation are connected.
- Click "Update" and enter the LinkStation's admin password.
- Click "OK".
- Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.
- When the update is complete, a message will be displayed.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Hdd Ssd Nas Usb Flash File Size: 129.7 MB Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit ,Windows Mac
Install DriverDevice Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012
Install DriverDevice Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012
Install DriverDevice Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012
Install DriverDevice Type: Hdd Ssd Nas Usb Flash File Size: 129.7 MB Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit ,Windows Mac
Install DriverDevice Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012
Install DriverDevice Type: Hdd Ssd Nas Usb Flash File Size: 383.5 MB Windows 2K ,Windows XP ,Windows Vista ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit
Install DriverDevice Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB OS Independent
Install DriverDevice Type: Hdd Ssd Nas Usb Flash File Size: 129.7 MB Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit ,Windows Mac
Install DriverDevice Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012
Install DriverFind Missing Drivers
Recent Devices
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.