Aopen AX6BC EZ Bios 1.08 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Aopen AX6BC EZ Bios 1.08
Category	Bios
Manufacturer	Aopen
File Size	197 KB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Aopen AX6BC EZ Bios 1.08 Description

# Checksum EF2Ch.
# No longer displays 'E' nor 'B' for Katmai and Coppermine of frequency over 600 MHz.
# Displays suffix 'A' for only Coppermine128K 533 MHz.
# No longer displays 'B' nor 'E' for Coppermine 128K (Celeron) CPU.
# Displays 800 for Coppermine 800/100 instead of 800E.
# Fixes detection error of 900 MHz (100x9) CPU (used to be 901MHz).
# Updates Slot 1 CPU micro code (CPUID=0686H).
# Updates FC-PGA package CPU micro code (CPUID=0686H).
# Updates Aoflash utility.
# Fixes that in Win2000 power cannot be turned off.
# [Note] Please follow steps below to flash this new type BIOS of AX6BC EZ motherboards. Procedure: Download this zipped file. Run shareware PKUNZIP (http://www.pkware.com/) which supports miscellaneous operation systems to extract the binary BIOS file and the flash utility. Or Winzip (http://www.winzip.com/) in Windows environment. Save "6BCEZ108.EXE" and "6BCEZ108.BIN" to a DOS floppy disk. Reboot your system with this disk without loading any memory handler (suh as EMM386) or device driver to get as much free space as possible. If you have an EPROM writer, simply take the .BIN file to program your BIOS. Execute A:>6BCEZ108 and the program will do the rest of it. DO NOT turn off power during flashing process, until you are asked to!! Reboot system and press "DEL" to enter BIOS setup, load "BIOS SETUP DEFAULT", then SAVE and EXIT. Done!


Specifications:


Model AX6BC EZ
CPU: FSB 100MHz
Slot 1
Support Intel Slot 1 Pentium II/III/Celeron
Chipset: Intel 440ZX
Intel PIIX4E
Main Memory : SDRAM DIMM
8/16/32/64/128/256MB
Support ECC
PC100 SDRAM
Max Memory : 512MB
Super I/O: Winbond
Clock Gen.: Cypress
Graphics: 2X AGP slot
IDE: Integrated DMA33 Controller
Max Disk : 137GB [28 bits ATA Spec.]
USB: USB 1.1 Port x 1
Slot: AGP
PCI
ISA
Storage & Back Panel I/O: IDE Channel : DMA33
Floppy Drive Connector : Floppy Drive Connector x 1
PS/2 Keyboard : x 1
PS/2 Mouse : x 1
Printer Port : Printer Port x 1
COM Port : COM Port x 1
USB Port : USB Port x 1
On Board Connector: CPU FAN
Chassis FAN
Front Panel Connector : Front Panel
IrDA Connector : IrDA
Wake_on_LAN
Wake_on_Modem
BIOS: Award PnP 2Mb Flash ROM BIOS
Form Factor: ATX
Board Size: 305 mm x 202 mm
Software & Utility: HWMON utility
EzRestore/ProMagic
Acrobat Reader
AOconfig utility
Online eBook Manual
Accessory: Bonus Pack CD disc
Floppy Disk cable
40-wire IDE cable

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Aopen Drivers