Arturia KeyLab 88 Keyboard Controller Firmware 1.2.0.5 Download

Posted at November 24, 2024 by PCI-DB Team

Arturia KeyLab 88 Keyboard Controller Firmware 1.2.0.5 Description

New Features

- Edit a 5-point velocity curve from the KeyLab 88 or the MIDI Control Center
- All parameters are accessible in the Param Edit mode of the KeyLab 88
 

Fixed Bugs:

- Aux pedal is now editable in menu browsing
- Aux pedal is in Control mode (continuous) instead of Switched Control mode (on/off)
- MMC controls in the MIDI Control Center are not mixed up anymore
- No more stuck notes when recalling a memory while a key is being pressed
- SOUND is lit at start-up instead of MULTI
- No more pads double trigs
- LCD dimming now works with all units

KeyLab firmware Update:

- Download the Latest Firmware
- Plug the KeyLab
- Launch the Midi Control Center
- Wait until the keyboard has been recognized by the Computer. The MCC will prompt the Version of the Firmware or the message :
“Keyboard Problem
The keyboard has not been detected”
- Click on Upgrade Firmware button
- Follow the instruction of the reboot alert.
- Next Step:
Unplug the KeyLab
Hold the “Sound”, “Multi”, “Edit” key
Plug the KeyLab
Wait during 5 seconds.
The “Update” Message is showing onto the Screen
- Click “OK” on the “reboot alert”, and choose the Firmware file
- Progress bar...
- Confirmation message (Click 'OK')
- Close the Midi Control Center.
- Reset to default
Press both octave buttons
Power up the keyboard

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Arturia Drivers