QNAP VS-2008L NVR Firmware 4.1.1 Download

Posted at December 22, 2024 by PCI-DB Team

QNAP VS-2008L NVR Firmware 4.1.1 Description

Fixes:

- In playback page, system will be hanging up when you use Storage Expansion and search the recording file in NAS.

New Features Supported:

Edge Recording is now officially supported:
- The camera can save the recording files on its local storage (such as a SD card) even when the connection to the NVR suddenly becomes unavailable. After the connection is resumed, the NVR will check its recording files and compare the recording schedule set by users. If the NVR detects that recording files are missing, it will request the camera to upload the missing part.
- Applied models: AXIS P1343, P1344, P3343, P5534, M5013, Q1602.

Surveillance storage expansion, VioStor NVR + Turbo NAS for storage expansion, is updated:

- Applied NVR series: Pro(+) series with FW v4.1.1
- Applied NAS series: TS-x69, x79, x70 series with FW v4.0.2
- Install QPKG of surveillance storage expansion on NAS (x69, x70, x79 series) with FW v4.0.2.
- Upgrade NVR firmware to v4.1.1, NAS firmware to v4.0.2.
- Make sure all your NVR and NAS servers are using fixed IP address and same subnet mask.
- Follow the user manual to configure your NVR and NAS.

User defined multi-stream has more camera supported:

- Applied model: SONY G6 series SNC-VB600/SNC-VB600B/SNC-VB630/SNC-VM600/SNC-VM600B/SNC-VM630/SNC-VM601/SNC-VM601B/SNC-VM631

Smart recording has more camera supported:

- Applied model: SONY G6 series SNC-VB600/SNC-VB600B/SNC-VB630/SNC-VM600/SNC-VM600B/SNC-VM630/SNC-VM601/SNC-VM601B/SNC-VM631

Two-way audio has more camera supported:

- Applied models: AXIS 212/ 214/ M1033/ M1034/ M1054/ P1343/ P1344/ P1346/ P1347/ P1353/ P1354/ P1355/ P1357/ P3301/ P3304/ P3346/ P3363/ P3364/ P3367/ P3384/ P5512/ P5534/ P5544/ P8221/ Q1602/ Q1604/ Q1755/ Q1902/ Q1910/ Q1921/ Q1922/ Q6032 / Q6034/ Q6035

New Cameras Supported:

- ZERO ONE brand is newly supported. IP2193PV2
- AVTECH IP cameras AVN284, AVM459, AVM500 are added.
- Brickcom IP cameras CB500Ap-360, FD-131AF, FD-132Np, MD-300Ap, VD-131Af, VD-301Af, MB-300Ap, WMB-300Ap, CB-300Ap, WCB-300Ap, CB-302Ap, WCB-302Ap, FD-302Ap, VD-302Ap, VD-300Ap, FD-300Ap, OB-300Ap, FB-300Ap, MD-300Ap, OB-302Ap, OB-300Af, VD-300Af are added.
- CP PLUS IP cameras CP-UNC-TY30FL2, CP-RNC-TP20FL3C, CP-NC9W-K , CP-RNC-DV10, CP-UNC-BY20C, CP-UNC-DP10, CP-RNP-1820 are added.
- D-Link IP cameras DCS-2310L, DSC-5010L, DSC-5020L are added.
- Dynacolor IP camera W3A2(fisheye) is added.
- Foscam IP camera FI9826 is added.
- Hikvision IP camera DS-2DF7284-A is added.
- IQinVision IP camera IQeye IQA31NI-B5 is added.
- Panasonic IP cameras WV- SF438, WV-SW458 are added.
- Planet IP camera IVS-H125 is added.
- TOA IP cameras N-CC2650M, N-CC2420MR are added.
- VIVOTEK IP cameras FD8131V, FD8151V, FD8163, FD8166, FE8173, FD8363, IP8152-F4, IP8332-C, IP8371-E, SD8363E are added.
- WISION IP camera WS-A5P31-A is added.
- ZAVIO IP camera D3110, D5114 is added.
- Supports monitoring, recording, and playback from more ONVIF conformant products.

Important Notice:

- For optimized system performance, please use minimum five hard drives for RAID 5 or minimum six hard drives for RAID 6 on VS-12100U-RP Pro(+), VS-8100U-RP Pro(+) and VS-8100 Pro+ series NVR.
- Strongly suggest to select 5% available storage capacity or above to overwrite the oldest recordings on Camera Settings -> Advanced Settings.
- To view the live video and export video by Internet Explorer, please add the NVR IP address to the list of trusted sites. While accessing NVR via IE, it will be prompted to install the ActiveX add-on at first time.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related QNAP Drivers