Flanders Scientific CM171 Monitor Firmware 1.1.03-2144 Download

Posted at November 21, 2024 by PCI-DB Team

Flanders Scientific CM171 Monitor Firmware 1.1.03-2144 Description

Fixes:

- Menus and some menu items rearranged for easier navigation.
- See updated user manual and/or updated online menu simulators for more details on revised menu order.
- PIP function renamed to PAP. 
- PAP/PIP default mode now PAP. 
- Added ability to toggle between PAP, PIP, POP, Vertical Split, and Horizontal Split by using up/down arrow keys while PAP function is active.
- Added ALL ON Keypad LED option. Allows easier identification of keypad buttons in vary dark operating environments. 
- 1.3mag added as anamorphic desqueeze option.
- BM/CM: DIT LUT now works with 4:4:4 RGB sources. 
- This firmware update will require you to reload any DIT LUTs you are using.
- If you are upgrading a monitor with a version older than 1937, you will also need to update the monitor's CFE.

CM Series Monitor Firmware Update Instructions

- Download new firmware file
- Check your monitor model and current firmware version in the monitor’s System Status menu.
If you are currently running firmware older than version 9.53-1907 proceed to step 3.
If you are currently running firmware version 9.53-1907 or later verify the UDisk option found on the monitor’s System Menu is set to ON and then skip to step 7.
- Turn the monitor OFF.
- Connect the provided Firmware Update Cable to the monitor’s GPI port.
- On the monitor’s keypad enter the following sequence: MENU, ENTER, UP, DOWN, MENU, ENTER, UP, DOWN, MENU, DOWN, POWER
- Connect the provided Firmware Update Cable to your computer’s USB port.
- The monitor will appear in Mac’s Finder or PC’s My Computer as mass storage.
- Copy / Paste or Drag and Drop the downloaded Firmware file to the monitor.
- Select Update Firmware from the monitor’s System (Color Management in older firmware versions) menu.
- Reboot the monitor when prompted after the update has succeeded.

About Monitor Firmware:

If you wish to update the monitor firmware version, know that this step can translate into improved overall performance, stability and compatibility, the inclusion of fixes for various issues encountered during the product’s lifetime, enhanced features or added support for new ones.

To perform this task, it would be best if you first read carefully and understand the installation steps necessary to successfully apply a new firmware version. If an update failure occurs, the monitor software can suffer serious malfunctions.

We recommend that any firmware upgrade be performed by a power user and only when the new version brings changes that you can make full use of. Also, after completing the update, do reboot the system to allow all changes to take effect.

In addition to that, make sure you apply the new version in a steady power environment such as the one ensured by a UPS unit, so that no power disruption affects the installation.

That being said, if you intend to update the monitor to this firmware version, click the download buttons and read the update instructions. Otherwise, check with our website as often as possible so that you don’t miss the release that your monitor needs. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Flanders Scientific Drivers