Intel S2600GZ Server Board IDA/OFU Firmware 2.01.0002 Download

Posted at April 29, 2024 by PCI-DB Team

Intel S2600GZ Server Board IDA/OFU Firmware 2.01.0002 Description

Versions:

- BIOS: 02.01.0002
- ME: 02.01.07.231
- BMC: 01.19.5018
- FRUSDR: 1.11

BIOS 02.01.0002

- Fixed: There is no System event log when SBE or MBE is triggered from some specific slot.
- Fixed: SysCfg utility ver 12.8 compatible issue with BIOS R02.01.0001.
- Fixed: Administrator/user password will be cleared by clearing CMOS on BIOS R02.01.0001.
- Change "UEFI network stack" and "IPv4 PXE support" default value to "Disabled".

ME 02.01.07.231

- Fixed: Improper ME FW Health Event is sent when ME is reset to factory defaults with IPMI command Force ME Recovery
- Fixed: Throttling statistics in domain 0 and 1 are equal to 0, when power policy is active in domain 0
- Fixed: Power limit oscillations were observed after adding 7 NM power limiting policies
- Fixed: NM Capabilities event is not sent after disabling then re-enabling scanning on its sensor
- Fixed: ME Power State Change notification is not sent after Set ME Power State command (M3 -> MOff)

BMC 01.19.5018

- Fixed: The Intel Xeon Phi Coprocessor adapters Status Sensor shows "Unknown" when only 1 adapter is in the system
- Fixed: System Events for DIMM thermal margin sensors are not decoded properly in the Embedded Web Server and Embedded Web Server log files.
- Fixed: Embedded Web console not displaying sensor values for sensors from another controller
- Fixed: Chassis identify not working as expected.
- Fixed: The IHC (Intel Hybrid Cloud) interface exposes a self-signed certificate containing a developer name and email address.
- Fixed: Integrated BMC Web Console Keyboard Macro Ctrl+Alt+F1 not working as expected.
- Fixed: BMC does not ignore momentary PWM interruptions after SMBALERT is asserted (SmaRT event).
- Fixed: Embedded Web Console Power Statistic page time value not getting updated.
- Fixed: IBMC used in Web Console Server Health > Event Log Page.
- Fixed: Embedded Web Console SEL decoding BMC FW Update Minor version incorrectly.
- Fixed: IO module Temperature sensor reading is always 0 on S2600JF.
- Fixed: Get User Access Command - Number of enabled users not correct.
- Fixed: Get/Set Processor Error Configuration and Status command not working as expected.
- Fixed: BMC update failing after 4 consecutive firmware updates. BMC will no longer stay in recovery mode (uboot) after four consecutive firmware updates.
- Fixed: JViewer always shows "Error reading video data" popup and a black screen when mouse mode is set to relative and JViewer tries to hide the cursor.
- Fixed: Multicast traffic was being passed through to the BMC causing slow downs and resets. This change enables multicast filtering, but still allows IPv6 multicasts for Neighbor Advertisement, Router Advertisement, and DHCPv6 relay and server multicast.
- Fixed: The UBoot code detects a bad CRC of the Ram Image when attempting to boot after getting a cold reset.
- Fixed: The recommendations in the Web Console Mouse Mode tab are out of date.
- Fixed: S1600JP 5V STBY sensor intermittently reporting low voltage error during AC cycle testing.
- Fixed: Disable POST codes LED output after system has completed POST
- Fixed: Correct the 750w PSU FW version.
- Fixed: S2600JP: Update SDR to version 1.04.
- Fixed: S2600CO: Update SDR to version 1.10.
- Fixed: W2600CR/S2600IP: Update SDR to version 1.10.
- Fixed: S2600JF: Update SDR to version 1.11.
- Fixed: Update EPSD Platforms Based on Intel Xeon Processor E5-4600/2600/2400/1600/1400 Product Families HSBP to 1p3 .
- Fixed: Update for 1600W DC PSU FW.
- Fixed: Updated version number information for S2400BB and S2600GL/S2600GL platforms.
- Fixed: Changed Fan Speed sensing and control when SMB Alert assertion is detected (SmaRT event)
- Fixed: Seeing false watchdog events after a BMC update or reset.
- Fixed: BMC watchdog resets seen during network flooding.
- Fixed: Some logged POST Errors codes causing Embedded Web Server SEL viewer to stop displaying.
- Added: DCMI 1.5 spec compliance on EPSD Platforms Based on Intel Xeon Processor E5-4600/2600/2400/1600/1400 Product Families
- Added: Enable Intel Xeon Phi Coprocessor adapters for W2600CR/S2600IP.
- Added: Added remote KVM watchdog. If there is an error on the remote KVM then wait one minute and then open a new KVM session.

FRUSDR 1.11

- Updated frusdr.efi utility version to 11.0 Build 20

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers