TRENDnet TEW-812DRU v2.0 Router Firmware 2.0.10.0 Download

Posted at December 31, 2024 by PCI-DB Team

TRENDnet TEW-812DRU v2.0 Router Firmware 2.0.10.0 Description

Release Notes

- Resolved internet disconnect 
- Resolved OpenOffice issue

NOTE:

- DO NOT upgrade firmware on any TRENDnet product using wireless connection.
- Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only

1. If a firmware upgrade is available, download the firmware to your computer.
2. Unzip the file to a folder on your computer.
Please note the following:
• Do not interrupt the firmware upgrade process. Do not turn off the device or press the Reset button during the upgrade.
• If you are upgrade the firmware using a laptop computer, ensure that the laptop is connected to a power source or ensure that the battery is fully charged.
• Disable sleep mode on your computer as this may interrupt the firmware upgrade process.
• Do not upgrade the firmware using a wireless connection, only using a wired network connection.
• Any interruptions during the firmware upgrade process may permanently damage your router.

Upgrade your router firmware

1. Log into your router management page.
2. Click on the Advanced tab.
3. Click on the Administrator section and click on Upload Firmware.
4. Depending on your web browser, in the Upload Firmware section, click Browse or Choose File.
5. Navigate to the folder on your computer where the unzipped firmware file (.bin) is located and select it.
6. Click Apply. If prompted, click Yes or OK.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TRENDnet Drivers