Gigabyte GA-H87N (rev. 1.1) Intel SATA Preinstall Driver 12.6.0.1033 for Windows 7/Windows 8 64-bit Download
Posted at December 22, 2024 by PCI-DB Team
Install Driver Automatically| Device Name | Gigabyte GA-H87N (rev. 1.1) Intel SATA Preinstall Driver 12.6.0.1033 for Windows 7/Windows 8 64-bit |
|---|
| Category | Motherboard |
|---|
| Manufacturer | Intel |
|---|
| File Size | 430 KB |
|---|
| Supported OS | Windows 7 64 bit ,Windows 8 64 bit |
|---|
Gigabyte GA-H87N (rev. 1.1) Intel SATA Preinstall Driver 12.6.0.1033 for Windows 7/Windows 8 64-bit Description
Specifications:
- CPU
Support for Intel Core i7 processors/Intel Core i5 processors/Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1150 package
L3 cache varies with CPU
- Chipset
Intel H87 Express Chipset
- Memory
2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
Dual channel memory architecture
Support for DDR3 1600/1333 MHz memory modules
Support for non-ECC memory modules
Support for Extreme Memory Profile (XMP) memory modules
- Onboard Graphics
Integrated Graphics Processor:
1 x DVI-I port, supporting a maximum resolution of 1920x1200
2 x HDMI ports, supporting a maximum resolution of 4096x2160
Support for HDMI 1.4a version.
Maximum shared memory of 1 GB
- Audio
Realtek ALC892 codec
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF Out
- LAN
Intel GbE LAN chip (10/100/1000 Mbit)(LAN1)
Atheros GbE LAN chip (10/100/1000 Mbit)(LAN2)
Teaming is not supported.
- Expansion Slots
1 x PCI Express x16 slot, running at x16
1 x mini-PCI Express slot for the wireless communication module*
WIFI module is optional.
- Storage Interface
Chipset:
4 x SATA 6Gb/s connectors
Support for RAID 0, RAID 1, RAID 5, and RAID 10
- USB
Chipset:
4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through the internal USB header)
6 x USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through the internal USB header)
- Internal I/O Connectors
1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
4 x SATA 6Gb/s connectors
1 x CPU fan header
1 x system fan header
1 x front panel header
1 x front panel audio header
1 x USB 3.0/2.0 header
1 x USB 2.0/1.1 header
1 x serial port header
1 x S/PDIF Out header
1 x Clear CMOS jumper
- Back Panel Connectors
1 x PS/2 keyboard/mouse port
2 x HDMI ports
1 x DVI-I port
4 x USB 3.0/2.0 ports
2 x USB 2.0/1.1 ports
2 x RJ-45 ports
1 x optical S/PDIF Out connector
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
- I/O Controller
iTE I/O Controller Chip
- H/W Monitoring
System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU/System fan speed control
- BIOS
2 x 64 Mbit flash
Use of licensed AMI EFI BIOS
Support for DualBIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related Intel Drivers