MSI P55A Fuzion Marvell SATAIII Management Utility 4.1.0.1601 Download

Chipset

- Intel P55 Chipset
- Hi-Speed USB (USB2.0) controller, 480Mb/sec.
- 6 SATAII ports with transfer rate up to 3Gb/s.
- PCI Master v2.3, I/O APIC.
- ACPI 2.0 compliant.
- Serial ATA RAID 0/1/5/10.
- Integrated AHCI controller.
- Lucid LT22102 Chipset
- This chipset supports A-mode, N-mode and X-mode, X-mode can only work with Microsoft Windows 7

Supported graphic libraries

- DirectX 9
- DirectX 10
- DirectX 11
* Lucid LT22102 chipset allows you can use the graphics cards from different vendors. To make A-mode, N-mode and X-mode work, you need to install the software drivers we provide. If your graphics cards are under ATI 4xxx, using driver 1.3.105 will get better perfomace. If you are using ATI 5xxx, you must install driver 1.4.106.  Please check Driver 1.3.105 readme and Driver 1.5.106 readme for more information.
* For Multi-GPU Computing driver ver 1.3.105 we recommend you install NVIDIA graphic card to the first PCI-E X16 slot while running X mode    
* For Multi-GPU Computing driver ver 1.5.106 we recommend you connect the display to the stronger graphics card while running non-identical A&N modes and X mode    
* This message would update on web page if needed when new Multi-GPU Computing driver has any further suggestion.

Main Memory

- Supports four unbuffered DIMM of 1.5 Volt DDR3 1066/1333/1600*/2000*/2133* (OC) DRAM, 16GB Max
- Supports 1Gb/ 2Gb/ 4Gb DRAM size
- Supports Dual channel mode

Slots

- 2 PCI Express gen2 x16 slots
- supports ATI Crossfire  & Fuzion N-mode, A-mode & X-mode
- 2 PCI Express gen2 x1 slots
- 2 PCI slots, support 3.3V/ 5V PCI bus Interface

On-Board SATA

- SATAII controller integrated in Intel P55 chipset
- Up to 3Gb/s transfer speed.
- Supports six SATAII ports (SATA1~SATA6) by P55
- Supports AHCI controller with AHCI / SATA RAID 0/1/5/10 by P55.
- SATAIII controller integrated in Marvell SE9128 chipset
- Up to 6Gb/s transfer speed.
- SATA7 & SATA8 support RAID 0/1 mode by Marvell SE9128
MSI Reminds You...
- The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.

USB 3.0

- 2 USB 3.0 ports by NEC uPD720200F1 (Rear panel x1, pinheader x1)

Audio

- Chipset integrated by Realtek ALC892
- Flexible 8-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec
- Meet Microsoft Vista Premium spec

LAN

- Supports one PCI Express LAN 10/100/1000 Fast Ethernet by Realtek 8111E.

IEEE1394 / FireWire

- VIA VT6315N chipset
- Supports up to two 1394 ports. (Rear panel x1, pinheader x1)
- Transfer rate is up to 400Mbps.

Internal I/O Connectors

- ATX 24-Pin power connector
- 8-pin ATX 12V power connector
- 6-pin VGA power connector
- CPU x 1 / System x 4 FAN connectors
- CD-in connector
- Front panel audio connector
- Front panel connector
- 1 x chasis intrusion connector
- 3 x USB 2.0 connectors
- 1 x USB 3.0 connector
- 6 x Serial ATAII connectors
- 2 x Serial ATAIII connectors
- 1 x IEEE1394 connector support additional 1 port
- 1 x Reset Button
- 1 x Power Button
- 1 x Clear CMOS jumper
- 1 x SPDIF-out connector
- 1 x TPM module connector
- 1 x OC Genie Button

Back Panel I/O Ports

- 1 x PS/2 Keyboard port
- 1 x PS/2 Mouse port
- 1 x Claer CMOS button
- 1 x Coaxial SPDIF-out
- 1 x Optical SPDIF-out
- 1 x IEEE1394 port
- 1 x RJ45 LAN Jack
- 6 x USB 2.0 ports
- 1 x USB 3.0 ports (blue)
- 1 x 6 in 1 audio jack

BIOS

- The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically.
- The mainboard provides a Desktop Management Interface(DMI) function which records your mainboard specifications.

Dimension

- 30.5cm(L) x 24.3cm(W) ATX Form Factor

It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Marvell Drivers