Trendnet TEW-452BRP B1.1R Firmware 4.00.0034 Download
Posted at November 2, 2024 by PCI-DB Team
Install Driver Automatically Device Name | Trendnet TEW-452BRP B1.1R Firmware 4.00.0034 |
---|
Category | Firmware |
---|
Manufacturer | Trendnet |
---|
File Size | 810 KB |
---|
Supported OS | Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window |
---|
Trendnet TEW-452BRP B1.1R Firmware 4.00.0034 Description
DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection onlyNote: Hardware Version (H/W) can be found on the label located at the bottom of the device.
Release Note:
1. Updated Dynamic DNS (DDNS) Client.
2. Increased "AP Mode" wireless signal stability.
3. Added "DHCP Client" feature, when the Router is set to "Wireless AP" mode (also updated the "Setup Wizard" to reflect this when the Router is in "AP Mode").
4. Added MPPE function
* add MSCHAP_SUPPORT,MPPE,CCP_SUPPORT,MSCHAPV2_SUPPORT in ipport.h and iniche.bld
* add mppe_enable in cfg.h
* add mppe enable and mppe length in UI page and language file
* add get_mppe_type function in htmlcgi.c and htmlcgi.h
5. Fixed WPA Wireless Encryption bug.
6. Updated "Ping Test" function under "Tool".
7. Fixed Protocol Filter rule enable/disable function.
8. Updated "Host Name" field to accept numbers and letters (upper and lower cases)
Firmware Upgrade Instructions:
Please download and unzip the firmware file to computer's local hard drive and then follow the instructions in the "readme.txt" file to upgrade the firmware.
Warning!
Firmware upgrade failure may permanently damage the unit and causing it not to function. If the issues in the "Release Note" do not address the problem you are experiencing, please do not upgrade the firmware. Never upgrade the firmware using a wireless connection. Firmware upgrade will reset the Router to factory default state (all current settings will be replaced by default settings). When necessary, please write down the Router's current settings before performing the firmware upgrade. Please do not load the previously saved Router "configuration file" to the new firmware. We apologize for the inconvenience.
If you need assistance performing the firmware upgrade or if you have any questions, please contact our Techsupport Team http://www.trendnet.com/support.
Specifications:
108Mbps 802.11g Wireless Router
The Wireless AP/Router is the cornerstone of your IEEE 802.11g wireless network. Capable of speeds of up to 108Mbps, the TEW-452BRP built-in AP facilitates seamless wireless communication between your devices. The unit?s router enables you to share a single Internet account with multiple users, while its 10/100Mbps 4-port switch gives you the flexibility to support wired Ethernet connections. With WEP and WPA-compliant encryption protecting your information, you?ll be able to share files, Internet connections, and other resources with the peace of mind you deserve. Other security features include a SPI firewall.
Features
* Wi-Fi Compliant with IEEE 802.11g and 802.11b Devices
* 4 x 10/100Mbps Auto-MDIX LAN Ports and 1 x 10/100Mbps WAN Port (Internet)
* Supports Cable/DSL Modems with Dynamic IP, Static IP, PPPoE, PPTP, or L2TP Connection Types
* Supports Super G and XR (eXtended Range) Technology Data Rate up to 108Mbps
* Compliant with Windows 95/98/NT/2000/XP, Linux and Mac OS
* DHCP Server Feature Allocates up to 253 Client IP Addresses
* Supports 64/128-bit Wired Equivalent Privacy (WEP) and WPA
* Supports MAC Address, IP, URL, Protocol Filters and Domain Blocking
* Traffic Control with Virtual Server and DMZ
* Provides Additional Security with SPI / NAT firewall and Attack Alert via emails
* Provides Additional Security of Enable/Disable SSID, Password Protection
* Supports Static and Dynamic Routing
* Supports IPSec and PPTP VPN Pass-Through Sessions
* Flash Memory for Firmware Upgrade, Save/Restore Settings, and Traffic Log
* Easy Management via Web Browser (HTTP) and Remote Management
* Range for Indoor of 30 ~ 50 meters (depends on the environment)
* Range for Outdoor of up to 200 meters (without XR), up to 450 meters (with XR) (depends on the environment)
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related Trendnet Drivers
Device Type: Firmware File Size: 957 KB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install Driver Device Type: Firmware File Size: 1.6 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install Driver Device Type: Firmware File Size: 2 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install Driver