Trendnet TEW-450APB A1 Firmware 2.05.b30 Download

Posted at April 30, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Trendnet TEW-450APB A1 Firmware 2.05.b30
Category	Firmware
Manufacturer	Trendnet
File Size	514 KB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Trendnet TEW-450APB A1 Firmware 2.05.b30 Description

DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only

Note: Hardware Version (H/W) can be found on the label located at the bottom of the device.


Description:
TEW-450APB Firmware version 2.05.b30

Firmware file:
Firmware_TEW-450APB_205b30.zip, 7-2006.

Release Note:
1. Fix UPnP release info.

Firmware Upgrade Instruction:

1. Download and Unzip the Firmware_TEW-450APB_205b30.zip file
2. Go to Access Point's configuration page (default IP: 192.168.1.1)
3. Go to Tools section and select the unzipped file for Firmware upgrade
* Please do not power on/off the Access Point during Firmware upgrade.



Specifications:

108Mbps 802.11g Wireless Access Point


The TRENDnet TEW-450APB 108Mbps High Speed 802.11g Wireless Access Point with XP support, which achieves ?wired? speeds wirelessly with the latest technology. Using frame bursts, frame compression, fast frames and dynamic turbo, the TEW-450APB can have speeds up to 108Mbps. The TEW-450APB is also compatible with standard 802.11b/g and has WPA-PSK, 64/128-bit WEP security.


Features

* Wi-Fi Compliant with IEEE 802.11g / 802.11b Wireless Devices
* High-Speed Wireless Access Point with up to 108Mbps Connection
* Supports Access Point, AP Client, Repeater and Bridge (PTP & PTMP) Modes
* Support WDS Enable/Disable Function for AP Client & Repeater Modes
* Supports Super G and XR (eXtended Range) Technology Data Rate up to 108Mbps (In AP Mode only)
* Dynamic Data Rate Scaling at 54, 48, 36, 24, 18, 12, 9 and 6Mbps for 802.11g
* Dynamic Data Rate Scaling at 11, 5.5, 2 and 1Mbps for 802.11b
* Supports ESSID Enable/Disable to Increase Security
* Supports 64/128-bit WEP (Hex & ASCII), WPA and WPA-PSK
* Allows 802.1x and Non-802.1x Clients Running Simultaneously
* Adjust Transmit Power (Full / Half (-3dB)/ Quarter(-6dB)/ Eighth(-9dB)/ Min)
* Easy Configuration with Web Browser and Built-in Flash Memory for Firmware Upgrade
* Range for Indoor of 30 ~ 50 meters (depends on the environment)
* Range for Outdoor of 50 ~ 200 meters (without XR), 400 ~ 450 meters (with XR) (depends on the environment)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Trendnet Drivers