Trendnet TEW-432BRP A1 Firmware 1.2.0.0019 Download

Posted at December 3, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Trendnet TEW-432BRP A1 Firmware 1.2.0.0019
Category	Firmware
Manufacturer	Trendnet
File Size	612 KB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Trendnet TEW-432BRP A1 Firmware 1.2.0.0019 Description

DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only

Note: Hardware Version (H/W) can be found on the label located at the bottom of the device.


Upload Procedures:

1. Download the firmware file, unzip and save it to your local disk
2. Go to TEW-432BRP?s web browser configuration page firmware upload section
3. Select the downloaded file to upgrade


Note:
For Hardware A1 unit, please update to firmware version 1.2.0.0015 first then update to firmware version 1.2.0.0019.


Specifications:

54Mbps 802.11g Wireless Firewall Router

The 54Mbps Wireless G Router offers a complete wireless solution that allows you to share files, an Internet connection, or network resource while protecting your network using enhanced security features. Simply plug your workstations and your broadband modem into the Wireless G router, and configure your broadband connection using its built-in Web Interface. Use the Virtual Server feature to configure any workstation as a Web Server or FTP server easily, allowing users to view files from the Internet. You can also protect your Wireless LAN using 64/128-bit WEP encryption or industry standard WPA-PSK with TKIP or AES algorithms. Increase security by enabling MAC, IP, or Protocol Filtering as well as setting Firewall Rules to limit Internet Access or block malicious intruders from accessing your network.

Features

* Wi-Fi Compliant with IEEE 802.11g and 802.11b Devices
* Built-in 4 x 10/100Mbps Auto-MDIX LAN Ports
* Built-in 1 x 10/100Mbps Auto-MDIX WAN Port (Internet) Supports Cable/DSL Modems with Dynamic IP, Static IP, PPPoE, or PPTP
* Connection Types
* DHCP Server Feature Allocates up to 253 Client IP Addresses
* Supports 64/128-bit Wired Equivalent Privacy (WEP)
* Supports 802.1x/WPA, WPA-PSK, TKIP/AES for Advance Security
* Supports MAC Address, Protocol Filters and UPnP (Universal Plug & Play)
* Traffic Control with Virtual Server, Virtual PC mapping and DMZ
* Provides Additional Security with SPI / NAT firewall and Attack Alert via emails
* Provides Additional Security of Enable/Disable SSID, Password Protection
* Supports Static and Dynamic Routing
* Supports IPSec and PPTP VPN Pass-Through Sessions
* Flash Memory for Firmware Upgrade, Save/Restore Settings, and Traffic Log
* Compliant with Windows 95/98/NT/2000/XP, Linux and Mac OS
* Easy Management via Web Browser (HTTP) and Remote Management
* Range for Indoor of 30 ~ 50 meters (depends on the environment)
* Range for Outdoor of 50 ~ 200 meters (depends on the environment)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Trendnet Drivers