Grandstream GXW4216 IP Analog Gateway Firmware 1.0.5.5 Download

Posted at December 3, 2024 by PCI-DB Team

Grandstream GXW4216 IP Analog Gateway Firmware 1.0.5.5 Description

BUG FIXES:

- Fixed device crashes under performance test
- Fixed if sending DTMF slightly faster via RFC2833, device does not send the end RTP event of DTMF
- Fixed device fails to handle multiple m lines in SDP correctly causing incoming call fail
- Fixed delay when registering to Failover Server
- Fixed if SRTP Mode set to Enabled and Forced, callee cannot hear anything right after off-hook
- Fixed even if P251 value is larger than P252, it can still be saved
- Fixed null dial plan can be saved and applied
- Fixed using inexpensive analog phones, sometimes there is ringing delay, or no ringing at all
- Fixed device port gets locked and has to be rebooted for the port to become operational again
- Fixed losing digits when sending out DTMF digits
- Fixed port 47 off-hook and on-hook constantly, after a while port 48 behaves the same under certain conditions
- Fixed SIP server and Outbound Proxy cannot be configured with host address like x.x.x.0
- Fixed sometimes couldn't make a call, but after a while device will work again
- Fixed one port cannot use, if off-hook can hear busy signal under certain conditions
- Fixed device registered to outside SIP server remotely, SIP server does not receive Register request
- Fixed network change while rebinding sockets will cause socket rebind infinite loop

ENHANCEMENTS:

- Added passive SNMP support
- Added support for configurable star codes
- Added support for uploadable IVR packs
- Added support for XML configuration file download
- Added support for configurable TTL Value for Keep-Alive messages
- Added option “Enable Fast RFC2833” in web UI
- Added separate Tos/CoS settings for SIP and RTP
- Added support to announce registration number via feature code
- Added support for TTY/TDD
- Modified some options' value when display language on web UI is Chinese
- Added security table to factory sector to store certificate and private key
- Changed P-Asserted-Identity (PAI) header to P-Preferred-Identity (PPI) header in SIP INVITE
- Moved Download Configuration button under Upgrade and Provisioning web UI
- Added configurable RFC 3261 timer D length support
- Updated to latest data model + CPE 1.0.1.47

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Grandstream Drivers