Intel S2600WT Server Board BIOS/Firmware 1.01.0008 Download

Posted at November 2, 2024 by PCI-DB Team

Intel S2600WT Server Board BIOS/Firmware 1.01.0008 Description

Changes in System BIOS 01.01.0008:

- The boot devices will increase if system reboot from RHEL7 aware UEFI and then the system will hang at high proportion
- SUT can't boot to RHEL 6.5 x64 when enable "VT for Directed I/O" in BIOS setting.
- Driver Health Protocol (DHP) not working correctly on Wildcat Pass
- Incorrect ACPI table causes NUMA issues in Linux
- System booted with only 1 QPI link trained, no errors reported
- Dual port IB IOM G52882-351 is showed as "single-port" description in BIOS setup menu.
- Display L2/L3 cache error detected on the RAID controller during post
- uEFI iSCSI boot configuration is lost after reboot
- New ESRT2 OpROM and uEFI Driver for Grantley
- New ESRT2 1.43 OpROM for inclusion into Grantley Production BIOS
- SMBIOS problem cause the latest IDA7.17.RC6 boot failure with the 12G SAS RS3LC bridge
- If Unplug USB scanner and then re-plug scanner back in ,USB scanner is inactive
- Secondary SATA info loading before Primary SATA info
- CCB 273: QRE: Reset after CATERR leaves system in a hung state" is open for annotation
- Pressing multiple F6 from SOL skips through boot manager.
- BIOS isn't reporting QPI link errors.
- Help text "Intel ESRT2 (LSI)" RAID mode not match with BIOS.
- TPM2.0 module can't work
- [SMBIOS] Type 8 no information for NGFF (M.2) device
- Syscfg_v13.1.4:a lot of invalid BIOS items displayed in syscfg.ini by command:syscfg /s syscfg.ini /f /b
- Sysinfo_v13.1.5:a lot of invalid BIOS items displayed at 'BIOS Settings' part in sysinfo_log.txt by command:sysinfo -ni
- USB Scanner can't work stably in EFI shell with Bios 691

BIOS Workaround for CWP 10G NIC OpROM issue:

- Roll back PXE OpROM V2.3.30 and UEFI V4.5.19 update
- Remove 1.43 UEFI ESRT2 OpRom
- Security Fix: Smm range check for signed update

Versions:

- System BIOS - R01.01.0008
- ME Firmware - 03.00.07.154
- BMC Firmware - 01.18.7601
- FRUSDR - 1.06

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers