Nec i-Select D5410 (Mini Tower) Chipset Driver 5.10 Download

Posted at December 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Nec i-Select D5410 (Mini Tower) Chipset Driver 5.10
Category	Motherboard
Manufacturer	Nec
File Size	179 KB
Supported OS	Windows XP

Nec i-Select D5410 (Mini Tower) Chipset Driver 5.10 Description

After download, doubleclick the downloaded file and follow the on-screen instructions in order to install this driver.


These are the drivers for the Core Logic (Chipset) : The ATI RS480 SB400 Chipset, used in the PowerMate VL350 series.


Specifications:


* Socket 939
o Support AMD Sempron, Athlon 64 and Athlon 64FX processors
o Support 800 and 1000Mhz HyperTransport (HT) interface speeds
* Core Logic (Chipset): The ATI RS480 SB400 chipset consisting of:
o PCI Express Interface
Compliant with the PCI Express 1.0a Specifications

* 1x1 PCI Express general purpose links
* Graphics:
* UMA mode operation requires no external memory
* HYPER MEMORY? technology offers optional dedicated Local Frame Buffer configuration for a 32-bit or 64-bit interface and up to 128MB of memory
* 3D Graphics
* 2D Graphics
* Multiple Display Feature:
* TV out
* Power Management Features
* Universal Connectivity
* System Memory: Four 184-pin DDR SDRAM DIMM sockets
* Serial Presence Detect
* Support for single-sided or double-sided DIMMs (DDR 333 / DDR400)
* Support for up to 4 GB system memory
* Asynchronous HyperTransport and memory controller interface speeds
* Supports dynamic link width and frequency change
* Non-ECC RAM (ECC memory will run in non-ECC mode)
* Single and dual channel mode operation:
* Single channel mode with single DIMM, non-symmetrical population or non-identical DIMMs
* Dual channel mode with 2 or 4 identical DIMMs, populated symmetrically
* AC'97 processing using the Realtek ALC655 codec
* Realtek RTL8110(SB) 10/100/1000 Mbps controller
* I/O controller : LPC Bus I/O controller (SMSC DME1737-NR) I/O controller with the following features:
* PS/2 Keyboard and Mouse controller
* AC Power Failure Recovery
* Floppy disk controller supporting one FDD with 360K, 720K, 1.2M and 1.44M-bytes
* Enhanced Digital Data Separator
* 2 serial ports, NS16C550A compatible UARTs with Send/Receive 16-Byte FIFOs.
* 1 Parallel Multi-Mode port supporting SPP (Standard parallel Port), EPP 1.7 and 1.9 (IEEE 1284 Compliant), and ECP (Extended Capabilities Port) modes
* Motherboard GLUE Logic
* LPC Interface ? PC99, PC2001 Compliant
* ACPI 2.0 Compliant
* One CPU Smart Fan controller based on temperature
* Temperature Monitor

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Nec Drivers