Pelco Sarix IXP21 IP Camera Firmware 3.29.27 Download

Posted at December 26, 2024 by PCI-DB Team

Pelco Sarix IXP21 IP Camera Firmware 3.29.27 Description

Improvements and Features:

- Added support for ONVIF Profile G.
- Added new image rate options (12, 7.5, 3, and 2 ips) for video stream configuration.
- Improved CPU efficiency when multiple video streams are in use.

Major Fixes:

- Corrected a memory leak issue that caused recording gaps and the cameras to reboot.
- Removed background and text color labels from the General Settings screen in the user interface.
- Corrected an issue that caused CPU usage to increase by 20 percent when the live preview window opened within the Imaging, Motion Detection, and Window Blanking configuration screens.
- Corrected an issue that caused camera time settings in the user interface to change time zones when the device was renamed.
- Corrected an issue with the quick autofocus in 5 Mpx dome cameras that caused the camera to lose focus at 1.36x zoom.
- Corrected an issue that prevented the SMTP Notification Handler from sending an email after a physical alarm had been triggered.
- Corrected an issue that caused SetMDRegion calls using Motion Detection to return an incomplete response.
- Removed analytics menu options from the video pane in the Endura user interface that were not applicable to the Sarix Professional Series.
- Corrected an issue that prevented live video streaming in the Endura SM5200 Web application when the “High” video preset option was selected in the camera.
- Corrected an issue that caused ONVIF communication with Digital Sentry DVR to fail when the camera’s secondary stream was cleared or disabled.
- Corrected an issue that caused the GetConfiguration call to time out during time setting updates.
- Corrected an issue that caused camera disconnection and recording gaps when streaming at 1 fps and 4 GOP using Lenel Onguard.
- Corrected an issue with the IBP519-ER bullet camera that caused camera video to set at the lowest possible bit rate value when configured with Lenel OnGuard.
- Corrected an issue with the IBP519-ER bullet camera that caused the camera’s user interface not to update frame rate values when set using Lenel OnGuard.

UPGRADING FIRMWARE FROM CAMERA WEB INTERFACE:

1. Use Internet Explorer to access the camera via its IP address.
2. Click on the Login link in the upper right corner of the page and then enter credentials for the administrator.
3. Click Settings and then navigate to the Firmware page under the System menu.
4. Click Browse to select the firmware file and then click Upload.
The camera will install the updated firmware and then restart. The firmware update process typically takes up to 5 minutes to complete.

About Network Camera Firmware:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Pelco Drivers