Allen & Heath GLD-112 Digital Mixer Firmware 1.20 Download

Posted at December 22, 2024 by PCI-DB Team

Allen & Heath GLD-112 Digital Mixer Firmware 1.20 Description

Features:

- Support for the new GLD112 mixer which adds a second model to the GLD range with larger surface and 8 more faders and 4 more SoftKeys.
- Pitch Shifter effect added to the FX rack.
- Rotator effect added to the FX rack for classic rotary speaker emulation.
- De-Esser processor added to the FX rack.
- Parallel path added to the channel and mix Compressors.
- Delay bypass switching added.
- Talkback trim control added.
- Latching or momentary Talk switch option.
- PAFL dim when Talkback active option.
- Option to disable PFL on pressing a processing Sel key.
- Option to link fader layers.
- HPF frequency and Comp threshold options added to the Custom Rotaries.

Improvements:

- Patch information and shortcut to I/O screen added to the USB playback and recording screen.
- Record source meter added to the USB recording screen.
- Ability to patch FX returns to outputs without the return strips becoming unassigned, for example to send the wet reverb and delay effects to the ME-1 personal mix system.
- Indicators added to the Scene Safes and Recall Filter page tabs to show when items have been made safe or filtered.
- Removal of unrelated routing information from the fader strip LCD display while in Matrix or FX Send mix mode.
- Addition of RTA Peak Band red dot in GEQ screen graph to show dominant frequency.

Fixed Issues:

- Changing the mix configuration did not correctly reset the mix channel delays.
- Adjusting a stereo channel preamp correctly affected the audio of two mono channels with the same preamps, but the mono channel with rhs preamp would not display the correct gain and settings values.
- Event log message ‘dSNAKE (AR2412) Lost Audio Sync’ on boot up. This would not result in a yellow triangle warning and did not cause any problem once the system had booted.
- On recalling a Show with a different mix configuration there could be a slight level change affecting both sides when nudging the Pan control. This would only happen once.
- The FX return fader strip LCD could incorrectly display the Direct Out level control of an input channel if that channel was assigned to the same strip on a different layer.
- The GEQ RTA would not display if the current PAFL source was stereo and panned hard right.
- Setting the Trim on Surface option would still give access to the preamp Pad control.
- Changing the Talkback source from an input socket to a Rack FX would not remove the preamp controls from the screen.
- Resetting ganged GEQs could result in not all their graphs being reset.
- On rare occasions the GLD could crash during strip assignment if the layer was changed while holding a strip in the screen.
- Setting Scene Safe on a stereo channel would not affect the safe status of the rhs mono channel if two mono channels has the same preamps as the stereo channel.
- With the FX return channel strip meter peaking the PEQ Peak indicator would not always light.
- Several other minor issues have also been fixed.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers