Teledyne LeCroy WaveAce 2014 Oscilloscope Firmware 5.03.02.38 Download

Posted at December 23, 2024 by PCI-DB Team

Teledyne LeCroy WaveAce 2014 Oscilloscope Firmware 5.03.02.38 Description

Summary of Changes:

- Fixed a problem where there was jitter on the output signal
- Fixed a USB Host Initialization Problem

The system software update files are then loaded through the USB memory port on the front of the oscilloscope. Updating the .ads File
1. Insert the USB memory device containing the software update in the USB port on the front of the oscilloscope.
2. Press the front panel Utility button.
3. Press the Next Page menu option button to navigate to menu page 3/4. Select the Update Firmware menu option button.
4. Press the SINGLE front panel button to begin loading the .ads firmware update file from your USB memory device. Otherwise, press the RUN/STOP front panel button to exit the Update Firmware screen.
5. Locate the .ads firmware update file, select it, and then press the Load option button.
6. The oscilloscope then beeps aloud twice and shows a screen stating - The firmware has been updated completely, please boot up the DSO again. At this point, turn your oscilloscope power Off, wait a short while, and then power it On again.
When the oscilloscope has rebooted, your update is complete.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Teledyne LeCroy Drivers