Albatron PX865PEL-800 3Com LAN Driver 2.0 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Albatron PX865PEL-800 3Com LAN Driver 2.0
Category	Network Card
Manufacturer	Albatron
File Size	415 KB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP

Albatron PX865PEL-800 3Com LAN Driver 2.0 Description

Supports 3Com LAN 10/100 Mbps LAN


Motherboard overview:

Feature

Intel Pentium 4 Processor (Celeron/Willamette/Northwood/Prescott)
Socket 478 with FSB 400/533/800 ( by overclocking) MHz
( FSB 800MHz setting available by overclocking )
3 DDR 333/266/400(Overclocked) Memory Sockets
6 Channel AC97 Audio
3Com 10/100 Ethernet LAN
2 Serial ATA150 Channels,
2 ATA100 Channels, up to 4 ATA 100 IDE Devices
6 USB 2.0/1.1 Ports (4 ports by optional cable)

Processor

Socket 478 Intel Pentium? 4 Processor (Willamette/Northwood/Prescott)

FSB / Transport

400/533/800 MHz( FSB 800MHz setting available by overclocking )

Chipset

North Bridge : Intel 865P
South Bridge : Intel ICH5
LAN Chip : 3Com 3C910-A01
Audio Codec : Realtek ALC650
I/O Chip: Winbond Smart I/O W83627HF

Memory

3 * DDR Sockets:
DDR266/333/400(Overclocked) NON-ECC DDR SDRAM up to 2GB
( Double Side DDR Memory on DIMM1,DMM2 only )
Note 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.
Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333
Note 3: If the FSB of your CPU is 800 MHz (Overclocked), the memory speed supports DDR 333/400

Expansion Slots

1 x AGP(3.0) 8X slot ( 1.5V & 0.8V only)
5 x PCI slots (PCI 2.3 compliant)

IDE / SATA Connectors

2 ATA100/66 Channels, up to 4 ATA 100 IDE devices

Onboard I/O Connectors

1 x Floppy Connector
2 x USB 2.0/1.1 header (4 ports by optional cable)
1 x CD_IN header
1 x S/PDIF in/out header (S/PDIF in/out cable optional)
1 x CPU fan header ( 1 fan rotation detection function )
2 x System fan headers ( 2 fan rotation detection function )
1 x 10 pin system panel header (Intel spec)
1 x 3 pin Power LED header
1 x Front audio header (Intel spec)
1 x IrDA header
1 x Case Open detection header
1 x Wake on LAN Connector

I/O via Back Panel

PS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1x Line-in/Line-out(Speaker Out)/MIC

Power

20-pin ATX power connector, 4-pin ATX 12V power connector

BIOS Feature

3Mb Flash EEPROM
Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC Timer

Hardware Monitoring

3FAN sensors, CPU/System voltages and temperature monitoring

Special Feature

Zero Jumper Design
Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclocking
Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)

Certifications

FCC, CE, BSMI

Form Factor

ATX (218mm x 293mm)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Albatron Drivers