Albatron PX865PEC Pro (V2.0) Realtek Audio Driver 6.0.1.6243 Download

Posted at November 2, 2024 by PCI-DB Team

Albatron PX865PEC Pro (V2.0) Realtek Audio Driver 6.0.1.6243 Description

Specifications:

Feature:
- Intel Pentium 4 Processors / Celeron Processors (Northwood/Prescott)
- Socket 478 with FSB 400/533/800 MHz
- 4 DDR266/333/400 Memory Sockets ( Dual Channel DDR400)
- 6 Channel AC97 Audio
- Realtek 10/100 Mbps LAN
- 2 ATA100 Channels
- 2 SATA150 Channels
- 8 USB 2.0/1.1 Ports (4 ports by optional cable)

Processor:

- Socket 478 with Intel Pentium 4 Processors / Celeron D Processors (Northwood/Prescott)

FSB / Transport:

- 400/533/800 MHz

Chipset:

- North Bridge: Intel 865PE
- South Bridge: Intel ICH5
- LAN Chip: Realtek RTL8100C
- AC97 Audio Codec: Realtek ALC655
- I/O Chip: ITE IT8712F

Memory:

- 4 x DDR Sockets
- DDR400/333/DDR266 NON-ECC DDR SDRAM up to 4GB

Expansion Slots:

- 1 x AGP(3.0) 8X slot (1.5V only)
- 5 x PCI slots (PCI 2.3 compliant)

IDE / SATA Connectors:

- 2 ATA100 Channels, up to 4 IDE devices
- 2 SATA 150MB/s Channels, up to 2 SATA devices

Onboard I/O Connectors:

- 1 x Floppy Connector
- 2 x USB 2.0/1.1 header (4 ports by optional cable)
- 1 x CD_IN header
- 1 x CPU fan header ( 1 fan rotation detection function)
- 1 x System fan headers ( 1 fan rotation detection function)
- 2 x 9 pin system panel header
- 1 x Front audio header (Intel spec)
- 1 x IrDA header

I/O via Back Panel:

- PS/2 keyboard/mouse, 4 x USB(2.0/1.1), RJ45,1x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MIC

Power:

- 20-pin ATX power connector, 4-pin ATX 12V power connector

BIOS Feature:

- 2Mb Flash EEPROM
- Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC Timer

Hardware Monitoring:

- 2FAN sensors, CPU/System voltages and temperature monitoring

Special Feature:

- Zero Jumper Design
- Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore,VMemory for overclocking
- Watch Dog Timer (auto-reset system when it can not handle overclock configurations)

Form Factor:

- ATX (224mm x 295mm)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Albatron Drivers