Arturia BeatStep Pro Controller Firmware 1.3.0.23 Download

Posted at December 22, 2024 by PCI-DB Team

Arturia BeatStep Pro Controller Firmware 1.3.0.23 Description

Features:

- Wait to load pattern (activated in the MIDI Control Center): when Wait to load pattern is On, it waits until the end of the pattern to switch
- Chaining pattern: Up to 16 patterns can be chained for each sequencer to create longer sequences. Use SHIFT + SEQ1, SEQ2 and/or DRUM and press the step buttons in the order of your chain.
- SHIFT + KNOB : Changes are applied to all the steps of the pattern using one knob. KNOB 1 is used for RELATIVE changes and KNOB 2 for ABSOLUTE changes. Velocity, Gate and Shift can be modified this way.
- Input MIDI channels can be set using SHIFT + CHAN combination.
- BeatStep Pro stays in sync when changing the time resolution or playback direction, by calculating the new playing position.
- SHIFT + PLAY restarts the 3 sequencers, quantized to the next Drum step.
- Hold notes triggered by pads in CONTROL mode when switching to another mode.
- Gate lengths have now a minimum value regardless of the tempo. The Minimum duration of a Gate is 3 ms.
- Copy patterns between SEQ1 and SEQ2: to copy a pattern from SEQ1 to SEQ2 : set the BeatStep Pro in SEQ1 Mode, then hold SAVE + SEQ2 + STEP in this order to save
- Saving patterns feedback: A dot is displayed at the bottom of the pattern number on the sequencer's display if the pattern is modified</li>
- BeatStep Pro shows the used patterns when saving: when pressing Save to save a pattern (SEQUENCER 1, 2 or DRUM) patterns which are not empty light up in white
- 7-segment displays blinking modification on pattern save
- The last used project will be loaded when the unit starts

Fixed Bugs

- Real-time recording improvements
- No lose synchronization when USB clock is used.
- MIDI output channels and Metronome state are now properly recalled
- no more knobs jump to 0 when turned fast
- Pads no longer lit when MIDI notes are triggered if SHIFT or DRUM or SEQ1/2 buttons are pressed
- Knob acceleration enhancement
- Looper reverse mode enhancement
- Mute mode enhancement
- Changing projects enhancements
- The Roller continues to play when touch strip is pressed before the pad

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Arturia Drivers