ASRock IMB-380-D Intel Rapid Start Driver 3.0.0.1031 for Windows 7/Windows 8 Download

Posted at December 22, 2024 by PCI-DB Team

ASRock IMB-380-D Intel Rapid Start Driver 3.0.0.1031 for Windows 7/Windows 8 Description

Specifications:

- Processor System
CPU Socket LGA1150 for Intel Core i7/i5/i3/Celeron (Haswell)
Core Number (By CPU, Max 4)
Max Speed (By CPU)
L3 Cache (By CPU)
Chipset Q87
BIOS UEFI

- Expansion Slot
PCI 2
MiniPCIe 1 (Full Size + USB 2.0)
mSATA 1
PCIe 1 (x16)+ 1 (x4)
CFast Card Socket 0

- Memory
Technology Dual Channel DDR3 1066/1333/1600 MHz SDRAM
Max. 32GB
Socket 4 x Long DIMM

- Graphics
Controller Intel HD Graphics (By CPU)
VRAM Shared Memory
VGA No
LVDS No
HDMI Supports HDMI 1.4a, max resolution 1920x1200
DVI Supports max resolution 1920x1200
DisplayPort Supports max resolution 2560x1600
MultiDisplay Yes (Three Display)

- Ethernet
Ethernet 10/100/1000 Mbps
Controller GbE LAN1:Intel I210, LAN2: Intel I217LM (with vPro support)
Connector
2 x RJ45

- SATA
Max Data Transfer Rate 2 x SATA2 (3.0Gb/s), 2 x SATA3 (6.0Gb/s), Supports RAID 0/1/5

- Rear I/O
VGA 0
DVI 1 (DVII)
HDMI 1
DisplayPort 1
Ethernet 2
USB 6 (4 x USB 3.0 compliant, 2 x USB 2.0 compliant)
Audio 3 (MicIn, LineOut, LineIn)
Serial 2 (RS232/422/485)
PS2 1 (Combo)

- Internal Connector
USB 6 (4 x USB 3.0 compliant, 2 x USB 2.0 compliant)
1 Vertical Type A USB Connector
LVDS / inverter 0
VGA 0
Serial 4 (RS232)
SATA 4 x SATA3 (6.0Gb/s), Supports RAID0/1/5
mPCIe 1
Parallel 1
mSATA 1
IrDA 0
GPIO 8bit 4 x GPI + 4 x GPO
SATA PWR Output Con 2
Speaker Header 1

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers