Arturia BeatStep Controller Firmware 1.1.0.0 Download

Posted at November 18, 2024 by PCI-DB Team

Arturia BeatStep Controller Firmware 1.1.0.0 Description

New Features

- Provide additional settings locally. There is now a way to set up some parameters directly on the unit while in SEQ mode. Shift + Knob 1: set gate time (50%..99%) Shift + Knob 2: set swing (50%..75%) Shift + Knob 3: set legato mode (off/on/on reset)
- Transpose pads with Controller in CNTRL mode It's now possible to transpose pads in CNTRL mode, using Shift + big knob, on a +/-24 half steps range.
- Extend sequencer big knob transposition range Transposition range (big knob) has been extended from +/-12 to +/-24 half steps

Bug Fixes

- Knob acceleration too slow Knobs are now accelerated properly when turned fast
- Default start up memory should be 1 At power up, sequence from memory #1 is recalled (previously, a default sequence was loaded)
- MIDI channel pad highlight in Controller mode. Pad back-lighting is now restored after channel setting and similar operations
- Stuck note in CV while switching CV channel while playing Changing CV channel while playing a sequence no longer produces stuck CV note
- RPN/NRPN fine mode not working RPN/NRPN fine mode now works as expected when activated with MIDI Control Center
- Big knob value update between CNTRL mode and SEQ mode Setting rate/transpose in SEQ mode no longer affects the volume setting internal position in CNTRL mode
- Bad handling of SPP (Song Position Pointer) message Fixed Song Position Pointer message handling (when EXT SYNC is active), leading to better compatibility with Maschine
- Inverted MIDI Values for pads/encoders It's now possible to program a pad or knob with min value > max value (useful for pads in switched control mode)

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Arturia Drivers