Pcchips P53G (V1.0) VIA SATA RAID Floppy Driver 5.50B Download

Posted at December 31, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Pcchips P53G (V1.0) VIA SATA RAID Floppy Driver 5.50B
Category	Other Drivers Tools
Manufacturer	Pcchips
File Size	377 KB
Supported OS	Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista

Pcchips P53G (V1.0) VIA SATA RAID Floppy Driver 5.50B Description

Specifications:


P53G is one of the most advanced and unique modules of PCCHIPS production. It can also support latest Intel Core2 Duo*/ Pentium D/ Pentium 4/Celeron D processors, up to 1066MHz FSB,DDR2 667, two serial ATAII and 8 USB 2.0 ports for features. With embedded Chrome9TM HC IGP engine, 256M share memory and one PCI Express x 16 slot, all these advance supports, we believe your computer can run with best performance and bring you the great value and enjoyment.



CPU
LGA775 socket for latest Intel Core2 Quad/ Core 2 Duo / Pentium D / Pentium 4 / Celeron D processor
FSB
1066/800/533 MHz
Storage
Support by VIA VT8237S
2 x Ultra DMA133/100/66 devices
2 x Serial ATA II devices
RAID0, RAID1 configuration
Chipset
VIA P4M900CD/VT8237S
VGA
Integrated Chrome9TM HC IGP which has up to 256MB share memory
Memory
Single-channel DDR2 memory architecture
2 x 240-pin DDR2 DIMM socket support up to 4 GB
Support DDR2 667/533/400 DDR2 SDRAM
Expansion Slots
1 x PCI Express x 16 slots
1 x PCI Express x 1 slot
2 x PCI slots
LAN
VIA VT6103L 10/100Mbps Fast Ethernet PHY
Audio
VIA 1708A 6-channel High Definition audio Codec
IDE
2 x UltraDMA 133/100/66
Back Panel I/O Ports
1 x PS/2 keyboard
1 x PS/2 mouse
1 x Serial Port
1 x VGA port
4 x USB 2.0 Ports
1 x RJ 45 Port
1 x Audio I/O (Line-in, Line-out and Mic-in)
Internal I/O Connectors & Headers
24-pin ATX Power Supply connector
4-pin ATX 12V power supply connector
2 x USB 2.0 header support additional 4 USB2.0 ports
2 x Serial ATA connectors
1 x Front panel switch/LED header
1 x Front panel audio header
CPU / SYS FAN headers
1 x IrDA for SIR header
1 x Speaker header
1 x CD in header
1 x Floppy connector-support 360K~2.88M Byte, 3 Mode FDDs or LS120
1 x IDE connector
1 x CLR CMOS
1 x SPDIF out header
1 x Parallel Header
System BIOS
AMI 4Mb SPI ROM
Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
Full support for ACPI revision 1.0 specification
Form Factor
Micro-ATX Form Factor, 244*200mm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Pcchips Drivers