Silicon Image SiI3132 SATALink Controller Driver 1.0.15.0 Download

Posted at May 3, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Silicon Image SiI3132 SATALink Controller Driver 1.0.15.0
Category	Motherboard
Manufacturer	Others
File Size	16.7 MB
Supported OS	Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit

Silicon Image SiI3132 SATALink Controller Driver 1.0.15.0 Description

This file installs the Silicon Image Serial ATA Raid 5 driver for the SiI 3132 controller

NOTE:

- Use this driver with the latest BASE BIOS to access non-RAID hard disk drives, CD-ROMs, CDRWs, DVD-ROMs, and DVD-RWs. 

About SATA / AHCI / RAID Driver:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers