Prolink WG3000-R Driver Utility 6.0 Download

Posted at November 5, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Prolink WG3000-R Driver Utility 6.0
Category	Network Card
Manufacturer	Prolink
File Size	5 MB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP

Prolink WG3000-R Driver Utility 6.0 Description

PROLiNK WG3000R PCI Adapter is a wireless PCI LAN card that lets you connect yourdesktop to a wireless local area network (LAN). A wireless LAN is like a regular LAN, except that you can share information without looking for a place to plug in, and augment networks without installing or moving wires.

Based on radio frequency technology, a wireless LAN transmits and receives data over the air, along with the guarantee to provide privacy and non-interference by the use of separate radio frequency.


￭Enhanced Wireless Security

￭54Mbps Wireless-G Mobility

￭Compliant with IEEE 802.11b/g standard

￭2.4GHz Wireless LAN

￭Compliant with PCI Standard

￭Works with all existing network

￭Compatible with specific wireless products and services

￭Capable of up to 128-Bit WEP Encryption

￭Freedom to roam while staying connected

￭54 Mbps High-Speed Transfer Rate

￭Rich diagnostic LED indicators

￭Lower power consumption

￭Easy to install and configure


Standard

￭ IEEE 802.11b/g, Wi-Fi compliant

Host Interface

￭ PCI 2.2

Antenna

￭ Dipole Antenna

Frequency Range

￭ 2.412GHz ~ 2.4835GHz

Operating Frequency/Channel

￭ USA & Canada 11 Channels
￭ Europe 13 Channels
￭ Japan 14 Channels

Modulation Technique

￭ Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK)

Security

￭ 0/64/128 bit WEP

Bit Error Rate

￭ Better than 10 -5

Data Rate

￭ Up to 54Mbps

Media Protocol

￭ CSMA/CA (Collision Avoidance) with ACK

Power Requirement

￭ Operating Voltage: 5V
￭ TX Consumption: 430mA (Max)
￭ RX Consumption: 300mA (Max)
￭ Sleep Mode: 25mA

Regulatory Approval

￭ EMC Certification FCC Part 15 in US
￭ EN300328 and EN300826 (EN301489- 17) in Europe

Dimensions

￭ 119.9(L) x 46.7(W) mm

Supported OS

￭ Windows 98/ME/2000/XP/Vista

Weight

￭ 50g

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Prolink Drivers