Panasonic AW-HE60 H Network Camera Firmware 1.04 Download

Posted at December 18, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Panasonic AW-HE60 H Network Camera Firmware 1.04
Category	Firmware
Manufacturer	Panasonic
File Size	4 MB
Supported OS	OS Independent

Panasonic AW-HE60 H Network Camera Firmware 1.04 Description

Fixes:
1) Even if the wireless remote control setting is set to “Disable" on AW-HE60 ("Wireless Control", camera menu item of AW-HE60), its Pan/Tilt motion may stop when the wireless remote controller is operated.

2) AW-HE60 has a picture shift between HD-SDI output and VBS output pictures.

3) AW-HE60 has a picture shift between its installation position settings of "Desktop" and "Hanging" ("Install Position", camera menu item of AW-HE60).

4) The unit fails to start up on rare occasions. (Power LED remains orange.)

5) Connect AW-RP120 with AW-HE60. And load the camera setting data (which is saved on an SD card inserted in AW-RP120) into AW-HE60. ("SD LOAD", MENU item of AW-RP120)

6) When this loading of the data involves video format change, "LOAD ERROR!" message may be shown.

7) Forced output of VBS signal is possible by using DIP switch on the bottom face of AW-HE60.
DIP SW6
OFF: As per “Monitoring mode” setting on the Web menu (Default)
ON: Forced output

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Panasonic Drivers