Albatron PX865PE PRO II BIOS R1.11a(Beta) Download

Posted at December 31, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Albatron PX865PE PRO II BIOS R1.11a(Beta)
Category	Bios
Manufacturer	Albatron
File Size	397 KB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Albatron PX865PE PRO II BIOS R1.11a(Beta) Description

1.Support E0 Stepping CPU.(Beta version)


Specifications:

CPU Intel
Chipset Intel 865PE/ICH5R
Socket 478
Form Factor ATX (244mm x 305mm)
FSB/Hyper Transport 400/533/800/1200 MHz(by overclocking)
Memory 4*DDR266/333/400 (Dual Channel DDR400)
Int. GFX N/A
AGP 8X
PCI-E/PCI 5
USB 8 USB 2.0/1.1 Ports (6 ports by optional cable)
LAN Intel 1Gbits LAN (CSA Port)
Sound 8 channel Audio Chip
IDE ATA100
RAID Promise RAID 0,1 /ATA133,Intel Serial ATA RAID 0
Serial ATA 2 * Serial ATA Channel
IEEE 1394 2*IEEE1394a Ports
BIOS Mirror Y
Voice Genies Y


Feature

Intel Pentium 4 Processor (Northwood/Prescott)
Socket 478 with FSB 400/533/800/1200(by overclocking ) MHz
( FSB1.2G Hz setting available by overclocking )
4 DDR400/333/266 Memory Sockets ( Dual Channel DDR400)
Built-in VIA Envy 24PT with 8 chan

Processor

Socket 478 Intel Pentium 4 Processor (Northwood/Prescott)

FSB / Transport

400/533/800/1200 MHz
( FSB1.2G Hz setting available by overclocking )

Chipset

North Bridge : Intel 865PE
South Bridge : Intel ICH5R
LAN Chip : Intel 82547EI ET LAN chip (CAS Port)
IEEE1394 Chip : VIA VT6307
Audio Chip : VIA VT1720 Evny 24PT
I/O Chip: Winbond Smart I/O W83627HF
Promise Chip: Promise PDC20276 Controller

Memory

4 * DDR Sockets:
DDR400/333/DDR266 NON-ECC DDR SDRAM up to 4GB
Note 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.
Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333
Note 3: If the FSB of y

Expansion Slots

1 x AGP(3.0) 8X slot (1.5V only)
5 x PCI slots (PCI 2.3 compliant)

IDE / SATA Connectors

2 ATA100/66 Channels, up to 4 ATA 100 IDE devices
Promise ATA133 Channel (Not supporting CD-ROM and ATAPI devices),
Promise RAID 0,1/ ATA133

Onboard I/O Connectors

1 x Floppy Connector
3 x USB 2.0/1.1 header (6 ports by optional cable)
2 x IEEE1394 header (2 ports IEEE1394 cable optional)
1 x CD_IN header
1 x S/PDIF in/out header (S/PDIF in/out cable optional)
1 x CPU fan header ( 1 fan rotation detection funct

I/O via Back Panel

PS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,1 x Com(serial), 1 x Parallel, 1x Line-in/Line-out(Speaker Out)/MIC/SUR_CEN/SUR/R:WOF,L:CEN

Power

20-pin ATX power connector, 4-pin ATX 12V power connector

BIOS Feature

4Mb Flash EEPROM
Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, GreenSuspend to RAM (S3), Suspend to Disk (S4)Wake on keyboard/mouse, Wake on LAN/RTC Timer

Hardware Monitoring

3FAN sensors, CPU/System voltages and temperature monitoring

Special Feature

Zero Jumper Design
BIOS Mirror ? Protect BIOS by creating an original mirror image of itself
Voice Genie? Voice Troubleshooting system ( four-Language )
Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP

Certifications

FCC, CE, BSMI

Form Factor

ATX (244mm x 305mm)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Albatron Drivers