Focusrite RedNet 6 Audio Interface Firmware 582 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Focusrite RedNet 6 Audio Interface Firmware 582
Category	Audio Dj Gear
Manufacturer	Focusrite
File Size	3.5 MB
Supported OS	OS Independent

Focusrite RedNet 6 Audio Interface Firmware 582 Description

Firmware update for RedNet 6 only. Please note this supercedes automatically deployed firmware version distributed with RedNet Control v1.2.

Fixes following bugs:

241741 – When RedNet 6 SRC was clocked to Word Clock input, corrupt MADI data could be transmitted
220335 – RedNet 6 does not retain clock source selection on power cycle

NOTE:

Firmware update for RedNet 6 only. Please note this supercedes automatically deployed firmware version distributed with RedNet Control v1.2.

To update RedNet 6 firmware, follow these instructions:

- Extract the firmware file from "RedNet 6 Firmware 582.zip"
- Launch RedNet Control
- Right click on the virtual RedNet 6 device panel
- Select Firmware Update...
- Choose the extracted file: "RedNet 6 Firmware 582.dnt"
- Wait for firmware update process to complete. Do not switch off or disconnect the device.
- After firmware flashing is complete, the unit will reboot
- The unit will now be updated and ready to use

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Focusrite Drivers