Focusrite RedNet Audio Interface Brooklyn 2 Firmware 2.11.315.1022 Download

Posted at April 24, 2024 by PCI-DB Team

Focusrite RedNet Audio Interface Brooklyn 2 Firmware 2.11.315.1022 Description

Yamaha CL and QL Series Compatible Firmware

- Yamaha CL Series compatibility.
- Yamaha QL Series compatibility.
- RedNet Firmware / Software Version in Dante Controller:
Brooklyn 2: 2.11.315.1022 

New Features

- Yamaha CL and QL Series Consoles will now provide control over the following parameters for RedNet 4 and RedNet MP8R:
- Gain
- Phantom Power (+48V)
- High-Pass Filter (HPF)

Additional Information

- To install firmware, right-click on the RedNet 4 or RedNet MP8R device you wish to update in RedNet Control and select 'Firmware Update' then select the correct Bkn-1 or Bkn-2 firmware file.
Note: RedNet Control will not allow you to put the wrong firmware file on the wrong device.
RedNet 4: Brooklyn 1 or Brooklyn 2.
RedNet MP8R: Brooklyn 2 Only.
- Once Yamaha ID is changed in RedNet Control, the RedNet device should be power cycled in order for it to be identified by the Yamaha CL or QL Series Console.
- RedNet 4 and RedNet MP8R will now have a 'Yamaha ID' dropdown menu available from within the 'Tools' menu.
- This contains a list of Yamaha ID numbers from Y000 to Y00F.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Focusrite Drivers