AUDIOTRAK Prodigy 7.1 LT Driver 1.16 Download

Posted at April 28, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	AUDIOTRAK Prodigy 7.1 LT Driver 1.16
Category	Sound Card
Manufacturer	AUDIOTRAK
File Size	2.4 MB
Supported OS	Windows 2K ,Windows XP ,Windows 2003

AUDIOTRAK Prodigy 7.1 LT Driver 1.16 Description

Features

Analog Inputs

* Type of Line-In ( mix in) : 3.5 mm mini phone jack
* Level of Line-in: -10dBV unbalanced, -10dBV nominal, 8dBV Max(gain 0 db)
* Impedance : 10k Ohm

Analog Ouputs

* Connector Type : 8channel analog line-out (3.5 mm mini phone jack)
* Level of Line-in: -10dBV unbalanced, -10dBV nominal, 8dBV Max(gain 0 db)
* Impedance : 100 ohms
* Attenuation Control : Digital 0dB?-96dB with mute, 0.75 step size

Mic Preamplifier

* Sensitivity : 127mV Max
* Gain adjustment : 20dB Fix and 0dB ~ 22.5dB
Variable(1.5dB Step Size)
* Impedance : 2K ohm
* 5V power supply, condenser and dynamic MIC

Sampling Rate Support: 16, 22, 24, 32, 44.1, 48, 88.2, 96, 176.4, 192kHz
A/D Converter

* Dynamic Range : 102 dB A-Weighted (Typical)
* the characteristics of frequency : 20 ~ 22.5kHz (@ fs=48kHz)
* sampling rate : ~ 96kHz
* Resolution : 24bit
* input gain control : 0.5dB

D/A Converter

* Dynamic Range (S/N) : 106 dB A-Weighted (Typical)
* The characteristics of frequency : 20 ~ 22.5kHz (@ fs=48kHz)
* Sampling rate : ~ 192kHz
* Resolution : 24bit
* Input gain control : 0.5dB

Digital specification

* Type : coaxial port, optical port (24-Bit/ 96kHz)
* Format : IEC-958Consumer(S/PDIF)
* Sampling rate : 32, 44.1, 48, 88.2, 96, 176.4, 192kHz

Headphone Amp specification

* Output : 120mW Max
* S/N ratio: 110dB (Typical)
* (THD N)/S : -70dB, 0.03% (Typical)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related AUDIOTRAK Drivers