D-Link DNR-2020-04P rev.A1 NVR Firmware 1.00.22 Download

Posted at December 3, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	D-Link DNR-2020-04P rev.A1 NVR Firmware 1.00.22
Category	Network Ip Surveillance Baby Camera
Manufacturer	D-Link
File Size	27.4 MB
Supported OS	OS Independent

D-Link DNR-2020-04P rev.A1 NVR Firmware 1.00.22 Description

The DNR-2020-04P JustConnect 16-Channel PoE Network Video Recorder is an all-in-one network video recorder (NVR) that can record video from up to 16 network cameras to its dual HDD storage.

With the integrated HDMI/VGA display output and USB port3, users can view, control and configure the DNR-2020-04P without the need to turn on their PC.

Firmware Update

- The firmware update must be saved on the local hard drive of your computer.
- Click Browse to search the local hard drive for the firmware update file. 
- Click Apply to upgrade.

About Network Video Recorder Updates:

Applying a new firmware package on your Network Video Recorder (NVR) should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The NVR should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn’t pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit’s setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Network Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don’t forget to regularly check with our website so that you don’t miss any updates.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers