Asus Rampage Extreme IMSM Driver 8.9.0.1023 WHQL Download

Chipset

Intel X48 / ICH9R
Intel Fast Memory Access Technology

Front Side Bus

1600/1333/1066/800 MHz

Memory

4 x DIMM, Max. 8 GB, DDR3 2000(O.C.)/1800(O.C.)/1600/1333/1066/800 ECC,Non-ECC,Un-buffered Memory
Dual Channel memory architecture
- Supports Intel Extreme Memory Profile (XMP)
- For the X.M.P. support, CPUs with FSB 1333 or above are recommended.
- When installing total memory of 4GB capacity or more, Windows 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended.

Expansion Slots

2 x PCIe 2.0 x16 , support at full x16, x16 speed
3 x PCIe x1 ( the PCIEx1_1 (black) is compatible with audio slot)
2 x PCI 2.2

CrossFire

Support ATI CrossFireX Technology graphics cards

Storage Southbridge

6 xSATA 3 Gb/s ports
Intel Matrix Storage Technology Support RAID 0,1,5,10

LAN

Dual Gigabit LAN controllers, both featuring AI NET2
Support Teaming Technology

Audio

SupremeFX X-Fi Audio Card
- ADI AD2000B 8-channel High Definition Audio CODEC
- EAX Advanced HD 4.0
- X-Fi CMSS-3D
- X-Fi Crystalizer
- Creative ALchemy
- Supports 1 x S/PDIF out header
- Supports Coaxial/Optical S/PDIF out ports on rear

IEEE 1394

2 x 1394a ports (1 port at back I/O, 1 port onboard)

USB

12 USB 2.0 ports (6 ports at mid-board, 6 ports at back panel)

Overclocking Features

Fusion Block System with optional thermal kit on MOS and NB
Extreme Tweaker
TweakIt
Extreme Engine
- 16-phase CPU power design
- 3-phase NB power design
- 2-phase DDR3 power design
- ML Caps on CPU, memory and NB respectively
Speeding HDD
iROG
BIOS Flashback
Loadline Calibration
Intelligent overclocking tools:
- CPU Level Up
- Memory Level Up
- AI Gear 3 +
- ASUS AI Booster Utility
- O.C Profile
Overclocking Protection:
- COP EX (Component Overheat Protection - EX)
- Voltiminder LED
- ASUS C.P.R.(CPU Parameter Recall)

Special Features

External LCD Poster
Onboard Switches: TweakIt / Power / Reset / Cls CMOS (at rear)
EL I/O
Q-Fan Plus
ASUS EPU-6 Engine
ASUS Q-Connector
ASUS Fan Xpert
ASUS EZ Flash 2
ASUS CrashFree BIOS 3
ASUS MyLogo3

Back Panel I/O Ports

1 x PS/2 Keyboard port(purple)
1 x External SATA port
2 x LAN (RJ45) port
6 x USB 2.0/1.1 ports
1 x IEEE1394a port
1 x Clr CMOS switch

Internal I/O Connectors

3 x USB 2.0 connectors supports additional 6 USB 2.0 ports
1 x Floppy disk drive connector
1 x IDE connector for two devices
6 x SATA connectors (Blue)
2 x Speeding HDD SATA connectors (Black)
8 x Fan connectors: 1 x CPU / 1 x PWR / 3 x Chassis / 3 x Optional
3 x thermal sensor connectors
1 x IEEE1394a connector
1 x LCD Poster connector
1 x EL I/O Shield connector
1 x Chassis Intrusion connector
24-pin ATX Power connector
8-pin ATX 12V Power connector
1 x En/Dis-able Clr CMOS slide switch
System panel connector

BIOS

16 Mb Flash ROM
DMI 2.0
AMI BIOS
PnP
WfM 2.0
SM BIOS 2.4
ACPI 2.0a
Multi-language BIOS

Manageability

WOL by PME,WOR by PME,Chasis Intrusion,PXE

Accessories

Fusion Block System Accessory
Optional Thermal Kit for NB and MOS
DIY Pedestal
ASUS Optional Fan
SupremeFX X-Fi Audio Card
External LCD Poster
3 in 1 ASUS Q-Connector Kit
UltraDMA 133/100/66 cable
Floppy disk drive cable
SATA cables
SATA power cables
2-port USB2.0 + IEEE 1394a module
EL I/O Shield
Thermal sensor cables
Cable Ties
User's manual

Support Disc

Drivers and applications
ASUS PC Probe II
ASUS Update
ASUS AI Suite
Sound Blaster X-Fi Utility
Futuremark 3DMark 06 Advanced Edition
Kaspersky Anti-Virus

Form Factor

ATX Form Factor
12 inch x 9.6 inch ( 30.5 cm x24.5 cm )
It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related INTEL Drivers