Dell PowerEdge 1800 BIOS 20.11.2006 Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Dell PowerEdge 1800 BIOS 20.11.2006
Category	Bios
Manufacturer	Dell
File Size	762 KB
Supported OS	Windows 2003

Dell PowerEdge 1800 BIOS 20.11.2006 Description

System Features:

Form factor Tower or 5U rack-mount
Processors Up to two 64-bit Intel? Xeon? processors at up to 3.8GHz
Front side bus 800MHz
Cache Up to 2MB L2
Chipset Intel E7520
Memory 256MB/12GB DDR-2 400 SDRAM
I/O channels Six total: two PCI ExpressTM slots (1 x 8 lane and 1 x 4 lane);
two PCI-X? slots (64-bit/100MHz); one PCI (32-bit/33MHz, 5v)
and one PCI (64-bit/66MHz)
Drive controller Embedded single channel Ultra320 SCSI and two-channel SATA controller
RAID controller Optional CERC SATA 6ch, CERC SATA 2S, PERC 4/DC, PERC 4/SC
and PERC 4e/DC
Drive bays Six 1" Ultra320 hot-plug SCSI drives or six cabled SATA drives
Maximum internal storage SCSI: up to 1.8TB with availability of 300GB hard drive; SATA: up to 1.5TB
Hard drives1 36GB, 73GB, 146GB and 300GB (10,000 rpm) Ultra320 SCSI
18GB, 36GB, 73GB and 146GB (15,000 rpm) Ultra320 SCSI
40GB, 80GB, 160GB and 250GB (7,200 rpm) SATA
Internal storage 10K/15K RPM SCSI drives; 7,200 RPM SATA drives
External storage Dell PowerVault? SCSI and Dell/EMC fibre channel storage
Tape backup options Internal: PowerVault 100T, 110T; 1/2 height tape drives supported internally
External: PowerVault 114T, 124T, 132T and 136T
Network interface card Single embedded Intel 10/100/1000 Gigabit2 NIC; Intel PRO/1000 MT Gigabit
NIC (copper), Intel PRO/1000 MF Gigabit NIC (fibre)
Power supply 650W non-redundant or 675W hot-plug redundant power
Availability ECC memory, Single Device Data Correction (SDDC); optional hot-plug
SCSI hard drives; optional hot-plug redundant power; tool-less chassis;
high availability fibre channel and SCSI cluster support; optional
hardware or software RAID; Active ID
Video Embedded ATI Radeon 7000-M with 16MB SDRAM
Remote management Baseboard Management Controller with IPMI 1.5 compliance,
accessible via network or serial port; optional DRAC 4/P PCI card
Systems management Dell OpenManage?
Rack support 4-post (Dell rack) and 3rd party

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Dell Drivers