Dell Precision 390 Intel Chipset Driver Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Dell Precision 390 Intel Chipset Driver
Category	Other Drivers Tools
Manufacturer	Dell
File Size	1.8 MB
Supported OS	Windows XP

Dell Precision 390 Intel Chipset Driver Description

Specifications

Microprocessor

Microprocessor types


Select Intel? Core? (dual core) processors

Intel? Pentium? 4 (single core) (with Hyper-Threading technology)

Intel? Pentium? D (dual core) (no Hyper-Threading technology)

Select Intel? Pentium? Extreme Edition processors (single or dual core) (with Hyper-Threading technology)

Cache


2MB or 4MB (depending on your configuration)

Memory

Type


533-MHz and 667-MHz ECC and non-ECC DDR2 SDRAM

NOTE: Ensure that you do not mix ECC and non-ECC memory.

NOTE: Your computer does not support registered or buffered memory.

Memory connectors


four

Memory capacities


512 MB, 1 GB, or 2 GB

Minimum memory


1 GB

Maximum memory


8 GB

BIOS address


F0000h

Computer Information

Chipset
Intel 975X

Data bus width
64 bits

Address bus width
32 bits

DMA channels
eight

Interrupt levels
24

BIOS chip (NVRAM)
8 Mb

Memory speed
533/667MHz

NIC


Integrated network interface with ASF 2.0 support as defined by DMTF

Capable of 10/100/1000-Mbps communication:

* Green ? A good connection exists between a 10-Mbps network and the computer.
* Orange ? A good connection exists between a 100-Mbps network and the computer.
* Yellow ? A good connection exists between a 1000-Mbps (1-Gb) network and the computer.
* Off ? The computer is not detecting a physical connection to the network.

SAS controller


add-in SAS 5iR card

System clock


800-MHz or 1066-MHz data rate (depending on your processor)

Video

Type


PCI Express x16 up to 150 W

Audio

Type


internal stereo: integrated HD audio or PCI option cards

Stereo conversion


24-bit analog-to-digital; 24-bit digital-to-analog

Controllers

Hard drive


integrated serial ATA (4), with RAID 0/1/5/10 and command queuing

integrated ATA-100 (1 channel)

Expansion Bus

Bus type


three PCI 2.2
one PCI Express x16 up to 150 W
one PCI Express x8, wired as x4
one PCI Express x1
eight USB 2.0 (2 front, 5 back, 1 internal)

Bus speed


PCI: 33 MHz

PCI Express:

x1 slot bidirectional speed - 500 MB/s

x 4 slot bidirectional speed - 2 GB/s

x16 slot bidirectional speed - 8 GB/s

Card slots


The upper five connector slots support full-length cards, and the connector slot at the bottom supports a half-length card.

NOTE: Check the documentation for cards to ensure that you can accommodate them in your configuration. Some cards that require more physical space and power (such as PCI Express graphics cards) may restrict the use of other cards.

PCI:




connectors


three

connector size


120 pins

connector data width (maximum)


32 bits

PCI Express:




connectors


one x1

connector size


36 pins

connector data width (maximum)


1 PCI Express lane

PCI Express:




connectors


one x4 full-length slot (supports x8, x4, and x1)

connector size


98 pins

connector data width (maximum)


4 PCI Express lanes

PCI Express:




connectors


one x16 slot (supports x16 and x1 modes/cards; x8 and x4 modes/cards are not supported)

connector size


164 pins

connector data width (maximum)


16 PCI Express lanes

Drives

Externally accessible:


one 3.5-inch drive bay (FlexBay) in desktop orientation, or two 3.5-inch drive bays (FlexBay) in tower orientation

two 5.25-inch bays

Available devices


serial ATA drive, SAS drive, floppy drive, Media Card Reader, USB memory devices, CD drive, CD-RW drive, DVD drive, DVD RW drive, and DVD and CD-RW combo drive

Internally accessible:


two 3.5-inch hard drive bays

Connectors

External connectors:

Serial


one 9-pin connector (optional 2nd connector); 16550C-compatible

Parallel


one 25-hole connector (bidirectional)

IEEE 1394a


one front-panel 6-pin serial connector (with optional card)

Video


VGA or DVI connector on graphic card

Network adapter


RJ45 connector

PS/2 (keyboard and mouse)


two 6-pin mini-DIN

USB


two front-panel, one internal, and five back-panel USB 2.0?compliant connectors

Audio


two rear connectors for line-in and line-out; two front-panel connectors for headphones and microphone

System board connectors:

Primary IDE drive


40-pin connector on PCI local bus

Serial ATA (4)


7-pin connector

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Dell Drivers