Stealth Cam STC-PX36NG Camera Firmware 604.002 Download

Posted at November 21, 2024 by PCI-DB Team

Stealth Cam STC-PX36NG Camera Firmware 604.002 Description

This firmware version does the following:

- Improves power management.
- Improves camera stability.

Firmware Update:

Note: It is recommended to perform the firmware update using new batteries. Loss of battery power during the firmware update may cause the camera to be non-operational.
1. Download the PX36NG (v604.002).zip file.
2. Unzip the file.
3. Go into the folder and copy the .ISP file to the root directory of a SD Card.
4. Remove power from camera by removing a battery from one of the battery components.
5. Place camera into CUSTOM mode.
6. Insert SD Card.
7. Hold the ENTER button and reinsert battery that was removed in Step 4.
8. Screen will display "-TEST-". Release the ENTER button.
9. Use the up arrow to navigate to "TEST". Press ENTER.
10. Use the up arrow to navigate to "UPGRADE". Press ENTER.
11. The unit will enter upgrade mode and should display " ,,
12. It takes about 2-3 minutes to upgrade.
13. After the upgrade, the unit will restart itself; remove power from the unit again.
14. Replace battery and place camera into CUSTOM mode.
15. Go into the Menu and select RESET, then YES to complete the upgrade.

About Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Stealth Cam Drivers