GIGABYTE GA-G31MX-S2 BIOS F2 Download

Posted at April 24, 2025 by PCI-DB Team

Install Driver Automatically

Device Name	GIGABYTE GA-G31MX-S2 BIOS F2
Category	Bios
Manufacturer	Gigabyte
File Size	546 KB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

GIGABYTE GA-G31MX-S2 BIOS F2 Description

BIOS Update: Updated CPU microcode (Support Intel Wolfdale CPU)


CPU

1. Support for an Intel? Core? 2 Extreme processor/ Intel? Core? 2 Quad processor/Intel? Core? 2 Duo processor/ Intel? Pentium? processor Extreme Edition/Intel? Pentium? D processor/ Intel? Pentium? 4 processor Extreme Edition/Intel? Pentium? 4 processor/ Intel? Celeron? processor in the LGA 775 package
(Go to GIGABYTE's website for the latest CPU support list.)
2. Support for Intel? Hyper-Threading Technology
3. L2 cache varies with CPU

Front Side Bus

1. 1333/1066/800 MHz FSB

Chipset

1. North Bridge: Intel? G31 Express Chipset
2. South Bridge: Intel? ICH7

Memory

1. 2 x 1.8V DDR2 DIMM sockets supporting up to 4 GB of system memory
2. Dual channel memory architecture
3. Support for DDR2 800/667MHz memory modules

(Go to GIGABYTE's website for the latest memory support list.)
Onboard Graphics

1. Integrated in the North Bridge

Audio

1. Realtek ALC888 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Support for S/PDIF In/Out
5. Support for CD In

LAN

1. RTL 8110SC chip (10/100/1000 Mbit)

Expansion Slots

1. 1 x PCI Express x16 slot
2. 1 x PCI Express x4 slot
3. 2 x PCI slots

Storage Interface South Bridge:

1. 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
2. 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices

iTE IT8718 chip:

1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive

USB

1. Integrated in the South Bridge
2. Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)

Internal I/O Connectors

1. 1 x 24-pin ATX main power connector
2. 1 x 4-pin ATX 12V power connector
3. 1 x floppy disk drive connector
4. 1 x IDE connector
5. 4 x SATA 3Gb/s connectors
6. 1 x CPU fan header
7. 1 x system fan header
8. 1 x front panel header
9. 1 x front panel audio header
10. 1 x CD In connector
11. 1 x S/PDIF In/Out header
12. 2 x USB 2.0/1.1 headers
13. 1 x chassis intrusion header
14. 1 x power LED header

Back Panel Connectors

1. 1 x PS/2 keyboard port Connectors
2. 1 x PS/2 mouse port
3. 1 x parallel port
4. 1 x serial port
5. 1 x D-Sub port
6. 4 x USB 2.0/1.1 ports
7. 1 x RJ-45 port
8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)

I/O Controller

1. iTE IT8718 chip

H/W Monitoring

1. System voltage detection
2. CPU/System temperature detection
3. CPU/System fan speed detection
4. CPU overheating warning
5. CPU/System fan fail warning
6. CPU fan speed control

BIOS

1. 1 x 4 Mbit flash
2. Use of licensed AWARD BIOS
3. PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b

Unique Features

1. Support for @BIOS
2. Support for Download Center
3. Support for Q-Flash
4. Support for EasyTune
5. Support for Xpress Install
6. Support for Xpress Recovery2
7. Support for Virtual Dual BIOS

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Gigabyte Drivers