Nikon COOLPIX S4200 Camera Firmware 1.2 Download

Posted at December 22, 2024 by PCI-DB Team

Nikon COOLPIX S4200 Camera Firmware 1.2 Description

Fixes:

- An issue that, in some rare cases, prevented the camera from turning on, or prevented operation, has been resolved.

Check your current firmware:

- Turn on the camera.
- Tap the menu tab at the bottom of the monitor to display the setting controls and tap Setup (wrench icon)
- Tap Firmware Version in the Setup menu(wrench icon)
- The camera's firmware version will be displayed.
- Turn off the camera.

Download and Installation instructions:

- Create a new folder with an appropriate name on your computer's hard disk.
- Download file to the folder created in step 1.
- Run the file to create the folder titled S4200Update, containing the following: firmware: folder containing the firmware.bin file.
- Insert the memory card containing the firmware folder into the camera and turn on the camera.
- Tap Firmware version in the Setup menu and follow the instructions displayed to upgrade the camera's firmware.
- After the upgrade is complete, turn the camera off and remove the memory card.
- Check the Firmware version item in the setup menu to confirm that the camera’s firmware has been upgraded.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Nikon Drivers