ASRock C226 WS Marvell SATA Driver 1.2.0.1032 Download

Posted at June 23, 2025 by PCI-DB Team

ASRock C226 WS Marvell SATA Driver 1.2.0.1032 Description

Specifications:

- Physical Status
Form Factor- ATX
Dimensions- 12'' x 9.6'' (30.5 cm x 24.4 cm)
Processor System

- CPU
Intel Xeon processor E3-1200 v3 product family & Haswell i3 processors
Supports Intel K-Series CPU
Supports Hyper-Threading Technology
Supports Intel Turbo Boost 2.0 Technology
Socket- Single socket H3 (LGA1150)
Power Design- 6 Power Phase Design

- Chipset- Intel C226

- System Memory
Capacity- 4 x 240-pin DDR3 DIMM slots
Support up to 32GB, un-buffered DIMM
Type- Dual Channel DDR3 1600/1333 UDIMM and ECC UDIMM
Supports DDR3 1600/1333
Voltage- Supports 1.35V to 1.60V

- Expansion Slot
PCIe 3.0 x 16- 2 slots ( PCIE6/PCIE3 : x16/x0 or x8/x8 mode)
PCIe 2.0 x 16- 1 slot (PCIE1: x4 mode)
PCIe 2.0 x 1- 3 slots (PCIE4/PCIE5/PCIE7)
PCI- 1 slot (PCIE2)

- Storage
SATA Controller- Intel C226 : 6 x SATA3 6.0 Gb/s
Additional SATA Controller- 2x Marvell SE9172 : 4 x SATA3 6.0 Gb/s (1 share with eSATA)

- Audio
Audio Codec- ALC1150

- Ethernet
Interface- Gigabit LAN 10/100/1000 Mb/s
LAN Controller- 2 x INTEL i210
Supports Wake-On-LAN
Supports Energy Efficient Ethernet 802.3az
Supports Dual LAN with Teaming function
Supports PXE

- Graphics
Controller- Intel HD Graphics Built-in Visuals and the VGA outputs can be supported only with processors which are GPU integrated
VRAM- Max. shared memory 1760MB
Output- Supports D-Sub with max. resolution up to 2048x1536 @ 75Hz

- Rear Panel I/O
PS/2 KB/Mouse- 1
VGA Port- 1 x HDMI + 1 x DVI-I + 1 x Display port
USB 2.0 Port- 4
USB 3.0 Port- 4
eSATA Port- 1 (eSATA3)
Lan Port
2 x RJ45 Gigabit Ethernet LAN ports
LAN Ports with LED (ACT/LINK LED and SPEED LED)
Audio- 5+1 Jack

- Internal Connector
COM Port Header- 1 (COM1)
Power LED Header- 1
Chassis Intrusion Header- 1
Auxiliary Panel Header- 1 (include chassis intrusion, front LAN LED)
TPM Header- 1
Fan Header- 5 (2 x 4-pin, 3 x 3-pin)
ATX Power- 1 (24-pin) + 1 (8-pin)
USB 2.0 Header- 3 (each support 2 USB 2.0)
USB 3.0 Header- 1 (each support 2 USB 3.0)

- BIOS
Type - 64Mb AMI UEFI Legal BIOS with GUI support
Features:
Plug and Play (PnP)
ACPI 1.1 Compliance Wake Up Events
SMBIOS 2.3.1 Support
DRAM Voltage Multi-adjustment
CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA Voltage Multi-adjustment

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Marvell Drivers