J-Micron JMB36X RAID Controller Driver 1.17.23 WHQL Download

Posted at April 29, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	J-Micron JMB36X RAID Controller Driver 1.17.23 WHQL
Category	Other Drivers Tools
Manufacturer	J-Micron
File Size	3 MB
Supported OS	Windows Vista

J-Micron JMB36X RAID Controller Driver 1.17.23 WHQL Description

Features:

Compliance
￭ Compliant with Serial ATA AHCI (Advanced Host Controller Interface) Spec. Reversion 1.0
￭ Compliant with Bus Master Programming interface for IDE ATA Controllers Revision 1.0
￭ Compliant with PCI Express Base Spec. Revision 1.0a
￭ Compliant with Serial ATA High Speed Serialized AT Attachment Spec. Revision 1.0a
￭ Compliant with Serial ATA II: Extensions to Serial ATA 1.0a Revision 1.1
￭ Compliant with Gen1m and Gen2m Serial ATA II: Electrical Spec. Revision 1.0


Overall
￭ Integrated 1-Lane PCI Express PHY and 2-port SATA II PHY
￭ Integrated two PLL for both PCI Express bus and SATA II interface
￭ Output swing control and Automatic impedance calibration for both PCI Express and SATA II PHY
￭ Supports up to 64K Byte external Flash for BIOS expansion
￭ Supports a slave SMBus interface (follow System Management Bus Specification Revision 1.1)
￭ Fabricated 0.18um/3.3V UMC CMOS Standard Logic Process with 1.8V and 3.3V
￭ Available in 128-pin LQFP package
￭ Pin compatible with JMB365 (1-port SATA II & 2-port PATA Host Controller)


PCI Express
￭ Supports 1-Lane 2.5Gbps PCI Express bus
￭ Internal native interface multiplexed to 2-port SATA II and 2-port PATA
￭ All registers accessible in unified memory space

SATA II
￭ Supports 2-port 3.0Gbps SATA II interface
￭ Supports two independent SATA II channels (separate logic and FIFO)
￭ Supports Native Command Queue (NCQ) on SATA II port
￭ Supports Hot Plugging like USB on SATA II port
￭ Supports SATA II Gen1m and Gen2m (External SATA Connection, eSATA)
￭ Supports Port Multiplier with Command-based Switching on SATA II port
￭ Supports up to UDMA6 transfer mode of PATA
￭ Supports up to 6 storage device connection
￭ Supports up to 0,1,0 1,JBOD RAID function

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related J-Micron Drivers