ASRock AD2550R/U3S3 Intel LAN Driver 18.1 Download

Posted at November 2, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ASRock AD2550R/U3S3 Intel LAN Driver 18.1
Category	Network Card
Manufacturer	INTEL
File Size	63 MB
Supported OS	Windows 2003 ,Windows 2008 ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows Server 2012

ASRock AD2550R/U3S3 Intel LAN Driver 18.1 Description

Specifications:

- Physical Status
Form Factor- Mini ITX
Dimensions- 6.7'' x 6.7'' (17.02 cm x17.02 cm)

- Processor System
CPU- Intel Dual-Core Atom D2550 Processor
Socket- 1x micro-FCBGA11
Power Design- 1+1 Power Phase Design
Chipset- Intel ICH10R

- System Memory
Capacity- 2 x SO-DIMM slots
Support up to 4GB
Type- Single Channel DDR3 memory technology
Supports DDR3 1066 DIMM
Voltage- 1.5V

- Expansion Slot
PCIe 3.0 x 16- 1 slot (x1)
mini PCIe- NA (optional)

- Storage
SATA Controller- Intel ICH10R : 5 x SATA2 3.0 Gb/s, support RAID 0, 1, 5, 10
Additional SATA Controller- Marvell SE9172; 2 x SATA3 6.0 Gb/s

- Ethernet
Interface- Gigabit LAN 10/100/1000 Mb/s
LAN Controller- 2 x Intel 82574L
Supports Wake-On-LAN
Supports Energy Efficient Ethernet 802.3az
Supports Dual LAN with Teaming functionSupports PXE

- Graphics
Controller- Integrated (GMA3600)
Output- Supports D-Sub with max. resolution up to 1920x1200 60Hz
Supports HDMI with max. resolution up to 1920x1200 60Hz

- Rear Panel I/O
PS/2 KB/Mouse- 1
VGA Port- D-sub x 1, HDMI x1
USB 2.0 Port- 6
USB 3.0 Port- 2
eSATA Port- 1
Lan Port- 2 x RJ45 Gigabit Ethernet LAN ports
LAN Ports with LED (ACT/LINK LED and SPEED LED)
Serial Port- 1

- Internal Connector
Auxiliary Panel Header- 1 (include chassis intrusion, location button & LED, front LAN LED)
TPM Header- 1
Fan Header- 3 (1 x 4-pin, 2 x 3-pin)
ATX Power- 1 (24-pin)
USB 2.0 Header- 2 (each supports 2 USB 2.0)
Type A USB 2.0 Port- 1
USB 3.0 Header- 1 (each supports 2 USB 3.0)
LVDS Connector- NA (optional)
Front Panel- 1
Speaker- 1 (4 pin)

- Onboard LED
Standby PWR LED 5vsb- 1

- BIOS Type
16Mb SPI Flash ROM
AMI UEFI BIOS

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related INTEL Drivers