Icom IC-7850 Transceiver Firmware 1.10 Download

Posted at December 21, 2024 by PCI-DB Team

Icom IC-7850 Transceiver Firmware 1.10 Description

Improvement:

- A Tracking function has been added to change the Main and Sub band frequencies in the same tuning steps at the same time using the Main dial.
- A Waterfall Marker Auto-hide function has been added to automatically hide the marker on the Waterfall display 2 seconds after you stop it in place.
- CI-V commands for antenna controllers and the spectrum scope have been added.
- The firmware update solves a problem where the S-meter may stop operating.

NOTE:

- The firmware can be updated using an SD card or USB flash drive. Thoroughly read Section 17 (UPDATING THE FIRMWARE) of the instruction manual to know what the update requires.
- Backup your transceiver's data onto an SD card or USB flash drive as it is possible that your data could get lost or corrupted during the update. Thoroughly read Section 10 (USING AN SD CARD OR USB FLASH DRIVE) of the instruction manual for details.
- Never turn OFF the transceiver power during the update.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Icom Drivers