D-Link DCM-200 Modem Driver 2.00 Download

Posted at February 22, 2025 by PCI-DB Team

D-Link DCM-200 Modem Driver 2.00 Description

Specifications:

Standards:
- MCNS/DOCSIS 1.0 Compliant
- IEEE 802.3 10BASE-T
Security:
- 56-bit DES (Data Encryption Standard) encryption and decryption support.
Dimensions:
- 8.69”(W) x 6.63”(D) x 1.44”(H)
Data Speed:
(Downstream – Receiver)
- Demodulation 64QAM, 256QAM
- Physical Speed 30.342Mbps (64QAM)
- 42.88Mbps (256QAM)
- Error Correction Reed-Solomon
- Frequency Range 91MHz-860MHz
- Input Signal Level -15dBmV to +15dBmV
(Upstream – Transmitter)
- Modulation QPSK, 16QAM
- Physical Speed 0.3 to 5.1Mbps (QPSK)
- 0.6 to 10.2Mbps (16QAM)
- Error Correction Reed-Solomon
- Frequency Range 5MHz to 42MHz
- MAC Protocol MCNS, DOCSIS 1.0 Compliant
- Output Signal Level +8 to +55dBmV (16QAM)
- +8 to +58dBmV (QPSK)
Power Supply:
- AC-to-DC power adapter (provide)
- DC Input: 12VDC/1A
Power Consumption:
- 12W (maximum)
Interface:
- CPE Interface - 10BaseT (RJ-45)
- RF Interface - F-Type Female 75ohm connector
- USB Interface – USB 1.1 compliant, Type B receptacle
Diagnostic LEDs:
- Power
- Link
- Activity

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers