ASRock E3C224 Marvell MRU Utility 4.1.0.2013 Download

Posted at December 3, 2024 by PCI-DB Team

ASRock E3C224 Marvell MRU Utility 4.1.0.2013 Description

Specifications:

- Physical Status
Form Factor- ATX
Dimensions- 12'' x 9.6'' (30.5 cm x 24.4 cm)

- Processor System
CPU- Single socket H3 (LGA 1150) supports Intel Xeon E3-1200 & E3-1200 v2 series & Haswell i3 processors
Supports Hyper-Threading Technology
Socket- Single Socket H3 (LGA1150)
Power Design- 6 Power Phase Design
Chipset- Intel C224

- System Memory
Capacity- 4 x 240-pin DDR3 DIMM slots
Support up to 32GB DDR3 ECC UDIMM
Type- Dual Channel DDR3 memory technology
Supports DDR3 1600/1333 ECC DIMM
Voltage- 1.5V, 1.35V

- Expansion Slot
PCIe 3.0 x 16- 2 slots (PCIE6 : x8 / PCIE4 : x8/x4)
PCIe 2.0 x 4- 1 slot (PCIE5: x0/x4 mode)
PCIe 2.0 x 1- 2 slots
PCI- 1 slot

- Storage
SATA Controller- Intel C224 : 4 x SATA3 6.0 Gb/s, 2 x SATA2 3.0 Gb/s, Support RAID 0, 1, 5, 10 and Intel Rapid Storage
Additional SATA Controller- Marvell SE9172: 2 x SATA3 6.0 Gb/s, support RAID 0, 1, NCQ, AHCI and "Hot Plug"
Marvell SE9172 RAID is supported with Windows OS only.

- Ethernet
Interface- Gigabit LAN 10/100/1000 Mb/s
LAN Controller- 2 x Intel i210
Supports Wake-On-LAN
Supports Energy Efficient Ethernet 802.3az
Supports Quad LAN with Teaming function
Supports PXE

- Managememt
BMC Controller- ASPEED AST2300 : IPMI (Intelligent Platform Management Interface) 2.0 with iKVM support
IPMI Dedicated GLAN- 1 x Realtek RTL8211E for dedicated management GLAN
Features- Watch Dog
NMI

- Graphics
Controller- ASPEED AST2300
VRAM- DDR3 16MB
Output- Supports D-Sub with max. resolution up to 1920x1200 @ 60Hz

- Rear Panel I/O
PS/2 KB/Mouse- 2
VGA Port- D-sub x 1
USB 2.0 Port- 2
USB 3.0 Port- 2
Lan Port- 2 x RJ45 Gigabit Ethernet LAN ports
1 x RJ45 Dedicated IPMI LAN port
LAN Ports with LED (ACT/LINK LED and SPEED LED)
Serial Port- 1 (COM1)

- Internal Connector
COM Port Header- 1 (COM2)
Front Lan LED Connector - 1
Auxiliary Panel Header- 1 (include chassis intrusion, location button & LED, front LAN LED)
TPM Header- 1
Thermal Sensor Header- 1
IPMB Header- 1
Buzzer- 1
Fan Header- 6 (5 x 4-pin, 1 x 3-pin)
ATX Power- 1 (24-pin)+1 (8-pin)
USB 2.0 Header- 2 (each support 2 USB 2.0)
Type A USB 2.0 Port- 1
USB 3.0 Header- 1 (each support 2 USB 3.0)

- System BIOS
BIOS Type- 64Mb AMI UEFI Legal BIOS with GUI support
BIOS Features- Plug and Play (PnP)
ACPI 1.1 Compliance Wake Up Events
SMBIOS 2.3.1 Support
DRAM Voltage Multi-adjustment
ASRock Instant Flash

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Marvell Drivers